Dual hybrid digital/analog tuners, low profile.
- Single slot PCI Express (PCIe) X1 board, half height.
- Two analog tuners, each with their own hardware encoders
- Two digital TV receivers for ATSC or clear QAM
- Dual built-in hardware MPEG-2 encoders.
- Pair of NXP TDA18271HD tuner chips.
Could someone who has this card please take a good look at the board and list all the chips here?
The REV C2F2 has
Making it Work
In September 2009, Steven Toth at kernellabs submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at Hauppauge WinTV-HVR-2200. Note that support is still limited to DVB-T / ATSC / QAM digital TV only; there is no analog support yet.
See instructions at Hauppauge WinTV-HVR-2200.
Development continues at http://www.steventoth.net/blog/products/hvr-2250/
The windows driver and linux firmware extraction scripts are up on http://www.steventoth.net/linux/hvr22xx
Drivers are expected to be included in Linux 2.6.32.
In the meantime, for stable tree hg clone http://kernellabs.com/hg/saa7164-stable/
For Development tree hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/
then... make menuconfig edit as needed make make install reboot
Sample Kernel Output
provide the relevant portion of dmesg here