Hauppauge WinTV-HVR-5500

From LinuxTVWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Overview/Features

  • PCI-e x1 interface
  • Supports DVB-C, DVB-S2, DVB-S, DVB-T, Analog-TV / Video, FM-radio

Components Used

Identification

04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04)
	Subsystem: Hauppauge computer works Inc. Device c138
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at d7a00000 (64-bit, non-prefetchable) [size=2M]
	Capabilities: [40] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] Vital Product Data
		Unknown small resource type 01, will not decode more.
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 4199
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [200 v1] Virtual Channel
		Caps:	LPEVC=1 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32+ WRR64+ WRR128-
		Ctrl:	ArbSelect=WRR64
		Status:	InProgress-
		Port Arbitration Table [240] <?>
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable- ID=1 ArbSelect=Fixed TC/VC=00
			Status:	NegoPending- InProgress-

Making it Work

Not fully supported; DVB-T (merged) and DVB-C (experimental patch) should work with the latest Linux-kernel, modules and firmware(s).

Firmware

cd ~
mkdir get_dvb_firmware
cd get_dvb_firmware
wget https://raw.github.com/torvalds/linux/master/Documentation/dvb/get_dvb_firmware
chmod a+x get_dvb_firmware
./get_dvb_firmware si2165
./get_dvb_firmware tda10071
sudo cp dvb-demod-si2165.fw /lib/firmware/
sudo cp dvb-fe-tda10071.fw /lib/firmware/

Drivers

DVB-C support hasn't been merged yet. There is however a patch provided by zzam that should add support for DVB-C. The patch is currently is testing phase, there is no time indication when this patch will be merged yet.

It may be necessary to have the latest drivers installed. A Linux 3.16> kernel is also recommended, because this brings a number of patches and fixes.

Switch modes (DVB-C/DVB-T)

Since this is a hybrid card, it is necessary to select the correct DVB-type on start-up:

# dvb-fe-tool --adapter=1 --frontend=0 --set-delsys=DVB-C

Sample Kernel Output

# dmesg
[  225.165026] cx23885: disagrees about version of symbol altera_init
[  225.165134] cx23885: Unknown symbol altera_init (err -22)
[  231.254056] cx23885: module_layout: kernel tainted.
[  231.254147] Disabling lock debugging due to kernel taint
[  231.257328] cx23885 driver version 0.0.4 loaded
[  231.257555] cx23885 0000:01:00.0: enabling device (0000 -> 0002)
[  231.257861] CORE cx23885[0]: subsystem: 0070:c138, board: Hauppauge WinTV-HVR                                                                                                                                                             4400 [card=38,autodetected]
[  231.585799] tveeprom 10-0050: Hauppauge model 121029, rev B3F5, serial# ****
[  231.585895] tveeprom 10-0050: MAC address is 00:0d:fe:8a:5d:3e
[  231.585973] tveeprom 10-0050: tuner model is NXP 18271C2 (idx 155, type 54)
[  231.586061] tveeprom 10-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/                                                                                                                                                             D1/K) ATSC/DVB Digital (eeprom 0xf4)
[  231.586185] tveeprom 10-0050: audio processor is CX23888 (idx 40)
[  231.586262] tveeprom 10-0050: decoder processor is CX23888 (idx 34)
[  231.586340] tveeprom 10-0050: has radio, has IR receiver, has no IR transmitt                                                                                                                                                             er
[  231.586430] cx23885[0]: warning: unknown hauppauge model #121029
[  231.586507] cx23885[0]: hauppauge eeprom: model=121029
[  231.603973] Chip ID is not zero. It is not a TEA5767
[  231.604118] tuner 11-0060: Tuner -1 found with type(s) Radio TV.
[  231.604376] tda18271 11-0060: creating new instance
[  231.606534] TDA18271HD/C1 detected @ 11-0060
[  231.935237] cx23885[0]: registered device video0 [v4l2]
[  231.937179] cx23885[0]: registered device vbi0
[  231.944390] cx23885[0]: registered ALSA audio device
[  231.944484] cx23885_dvb_register() allocating 1 frontend(s)
[  231.944557] cx23885[0]: cx23885 based dvb card
[  231.962906] i2c i2c-10: a8293: Allegro A8293 SEC attached
[  231.963375] DVB: registering new adapter (cx23885[0])
[  231.963469] cx23885 0000:01:00.0: DVB: registering adapter 0 frontend 0 (NXP                                                                                                                                                              TDA10071)...
[  231.965295] cx23885_dvb_register() allocating 1 frontend(s)
[  231.965418] cx23885[0]: cx23885 based dvb card
[  231.976091] i2c i2c-10: si2165: hardware revision 0x03, chip type 0x07
[  231.976220] tda18271 11-0060: attaching existing instance
[  231.976637] DVB: registering new adapter (cx23885[0])
[  231.976709] cx23885 0000:01:00.0: DVB: registering adapter 1 frontend 0 (Sili                                                                                                                                                             con Labs Si2165 DVB-T DVB-C)...
[  231.979802] cx23885_dev_checkrevision() Hardware revision = 0xd0
[  231.979908] cx23885[0]/0: found at 0000:01:00.0, rev: 4, irq: 16, latency: 0,                                                                                                                                                              mmio: 0xfe800000
[  271.659164] i2c i2c-10: si2165: downloading firmware from file 'dvb-demod-si2                                                                                                                                                             165.fw' size=5768
[  271.662577] i2c i2c-10: si2165: si2165_upload_firmware extracted patch_versio                                                                                                                                                             n=0x9a, block_count=0x27, crc_expected=0xcc0a
[  272.749751] i2c i2c-10: si2165: fw load finished

External Links