Hauppauge WinTV-NOVA-S USB: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
A |
A [[USB1.1]] [[DVB-S]] device designed by [[Technotrend]] and sold by [[Hauppauge]]. Based on a Texas Instruments [[DSP]] that remultiplexes the stream into a [[Technotrend]]-proprietary USB packet format and sends it as [[Isochronous USB Stream]] over the USB Bus. |
||
As decoder a [[TDA8083]] or a [[STV0299]] is used. |
As decoder a [[TDA8083]] or a [[STV0299]] is used. |
||
| Line 7: | Line 7: | ||
Linux driver exists. Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. |
Linux driver exists. Requires a [[Firmware]] that needs to get peeled out of the Windows Driver. |
||
A similiar [[DVB-T]] device is available, the [[WinTV-NOVA-T USB]] |
A similiar [[DVB-T]] device is available, the [[WinTV-NOVA-T USB]]. |
||
Revision as of 16:14, 19 September 2004
A USB1.1 DVB-S device designed by Technotrend and sold by Hauppauge. Based on a Texas Instruments DSP that remultiplexes the stream into a Technotrend-proprietary USB packet format and sends it as Isochronous USB Stream over the USB Bus.
As decoder a TDA8083 or a STV0299 is used.
Due to the limited USB1.1 Bus Bandwidth of about 12MBit only selected PIDs can get transferred over the USB Bus to the Host. Some High-Bandwidth Transponders don't work.
Linux driver exists. Requires a Firmware that needs to get peeled out of the Windows Driver.
A similiar DVB-T device is available, the WinTV-NOVA-T USB.