- Microtune MT2060 tuner
- Dibcom DiB7700 DVB-T demodulator & USB 2.0 controller
- IR receiver
|USB ID||Model no.||Version||Tuner||Supported from|
- One model number is above the MAC address on the label on the underside of the device.
- The other model number and the version information are on the base of the box, below the bar code.
Making it work
You will need the dvb-usb-dib0700-03-pre1.fw firmware file in /lib/firmware or the relevant place for your distribution.
For devices with box number 293 and device number 70009 the kernel may require firmware version dvb-usb-dib0700-01.fw. Rename the firmware linked above or put a link. Seems to work fine.
Status on 11 August 2007
Just use Mercurial by following the How_to_install_DVB_device_drivers instructions.
Sample kernel output
This is for the 70001 version, using the driver in Linux 188.8.131.52.
usb 1-10: new high speed USB device using ehci_hcd and address 8 usb 1-10: configuration #1 chosen from 1 choice dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick). DVB: registering frontend 2 (DiBcom 7000MA/MB/PA/PB/MC)... MT2060: successfully identified (IF1 = 1220) dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
Remote control support
Supported in v4l-dvb as of 18 August 2007. The 70001 version has an IR sensor, and the 70009 version is listed by Wikipedia as having one. It works with Hauppauge's 45-button remote control and will handle signals from similar remote controls.
If you have problems with a flood of "unknown key" messages in the kernel log, you'll also need this patch (it is not cleanly applicable to recent trees, but it is an easy one-liner to do by hand).