Difference between revisions of "KNC1 TV-Station DVB-T"

From LinuxTVWiki
Jump to navigation Jump to search
(add some info about knc1 dvb-t)
 
Line 9: Line 9:
 
The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak).
 
The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak).
   
The card also has a CI connector ''but it most probably isn't supported by Linux''.
+
The card also has a CI connector, which is supported under Linux.
   
 
The card uses the '''budget-av''' driver in Linux, and requires Firmware for the TDA10046.
 
The card uses the '''budget-av''' driver in Linux, and requires Firmware for the TDA10046.

Revision as of 11:43, 8 April 2006

A DVB-T PCI card produced by KNC1 based on the SAA7146.

Works fine under Linux.

This card is able to deliver the full MPEG2 Transport Stream to the host.

Details

The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak).

The card also has a CI connector, which is supported under Linux.

The card uses the budget-av driver in Linux, and requires Firmware for the TDA10046.