KWorld ATSC 115: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(some rearrangements, deletions and additions) |
||
| Line 1: | Line 1: | ||
[[image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Front view of ATSC 115]] |
[[image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Front view of ATSC 115]] |
||
An [[ATSC]] [[ATSC PCI Cards|PCI card]]. This device, which is also known as the KWorld PlusTV HD PCI-115, is |
An [[ATSC]] [[ATSC PCI Cards|PCI card]]. This device, which is also known as the KWorld PlusTV HD PCI-115, is physically identical to the earlier released [[KWorld]] [[KWorld ATSC 110|ATSC 110]]. Consequently, it is supported (see below for [[KWorld ATSC 115#Support Status|further details]]. |
||
==Differences with the ATSC 110== |
|||
Components: |
|||
* The ATSC 115 does, however, have a new PCI subsystem ID of 17de:7352, as shown in the output of ''lspci -vvnn'' : |
|||
* [[Philips_SAA7134|Philips SAA7134]] |
|||
* nxt2004 demodulator |
|||
| ⚫ | |||
| ⚫ | |||
Output of ''lspci -vvnn'' : |
|||
<pre> |
<pre> |
||
02:09.0 0480: 1131:7133 (rev d1) |
02:09.0 0480: 1131:7133 (rev d1) |
||
| Line 24: | Line 17: | ||
Status: D0 PME-Enable- DSel=0 DScale=3 PME- |
Status: D0 PME-Enable- DSel=0 DScale=3 PME- |
||
</pre> |
</pre> |
||
| ⚫ | |||
* It has a shiny new label which graphically displays the word "PlusTV", reflecting the name branding that KWorld has recently begun using |
|||
* Has new software (ArcSoft) for Windows based OS Platforms ... which probably won't matter many Linux users |
|||
==Support Status== |
|||
Output of ''lspci -vn'' : |
|||
| ⚫ | |||
<pre> |
|||
02:09.0 0480: 1131:7133 (rev d1) |
|||
Subsystem: 17de:7352 |
|||
==External Links== |
|||
Flags: bus master, medium devsel, latency 64, IRQ 16 |
|||
* [http://www.kworld.com.tw/product_overview.aspx?P_ID=47 KWorld product page] |
|||
Memory at fcfdf800 (32-bit, non-prefetchable) [size=2K] |
|||
Capabilities: [40] Power Management version 2 |
|||
</pre> |
|||
Revision as of 20:49, 30 September 2007
An ATSC PCI card. This device, which is also known as the KWorld PlusTV HD PCI-115, is physically identical to the earlier released KWorld ATSC 110. Consequently, it is supported (see below for further details.
Differences with the ATSC 110
- The ATSC 115 does, however, have a new PCI subsystem ID of 17de:7352, as shown in the output of lspci -vvnn :
02:09.0 0480: 1131:7133 (rev d1)
Subsystem: 17de:7352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fcfdf800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=3 PME-
- The ATSC 115 card also ships with a different remote than the ATSC 110; it is currently unknown if the same keycodes are used.
- It has a shiny new label which graphically displays the word "PlusTV", reflecting the name branding that KWorld has recently begun using
- Has new software (ArcSoft) for Windows based OS Platforms ... which probably won't matter many Linux users
Support Status
The card is currently detected as a generic card by the saa7134 driver. Loading the module with "card=90" should set things up exactly the same as a KWorld ATSC 110. See that device's entry for further details.