Leadtek WinFast HDTV200 H

Leadtek WinFast HDTV200 H

A hybrid ATSC PCI card from Leadtek.

Overview/Features

A dual RF input hybrid PCI device. It supports ATSC (8-VSB) and NTSC inputs, as well as analog A/V inputs and an IR remote control.

Note the similarly named Leadtek WinFast PalmTop DTV200 H.

Components Used

HDTV200H components

• NXP/Philips SAA7131E (A/V decoder and PCI Interface)
• NXP/Philips TDA8290 (analog IF demodulator, embedded on the SAA7131E/03/G chip)
• NXP/Philips TDA18271HDC2 (tuner)
• Samsung S5H1411 (digital demodulator)
• NXP/Philips HEF4052BT (analog multiplexer)
• Holtek HT24LC02 (serial EEPROM)

Identification

The card has a PCI subsystem ID of 1131:7133. Output of lspci -vvnn:

06:06.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: LeadTek Research Inc. Device [107d:6f2e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (21000ns min, 8000ns max)
	Interrupt: pin A routed to IRQ 3
	NUMA node: 0
	IOMMU group: 12
	Region 0: Memory at fd9ff000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Kernel modules: saa7134