Leadtek WinFast HDTV200 H

From LinuxTVWiki
Revision as of 23:10, 2 October 2021 by Cottsay (talk | contribs) (Fix the subsystem ID)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Leadtek WinFast HDTV200 H

A hybrid ATSC PCI card from Leadtek.


A dual RF input hybrid PCI device. It supports ATSC (8-VSB) and NTSC inputs, as well as analog A/V inputs and an IR remote control.

Note the similarly named Leadtek WinFast PalmTop DTV200 H.

Components Used

HDTV200H components
  • NXP/Philips SAA7131E (A/V decoder and PCI Interface)
  • NXP/Philips TDA8290 (analog IF demodulator, embedded on the SAA7131E/03/G chip)
  • NXP/Philips TDA18271HDC2 (tuner)
  • Samsung S5H1411 (digital demodulator)
  • NXP/Philips HEF4052BT (analog multiplexer)
  • Holtek HT24LC02 (serial EEPROM)


The card has a PCI subsystem ID of 107d:6f2e. Output of lspci -vvnn:

06:06.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: LeadTek Research Inc. Device [107d:6f2e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (21000ns min, 8000ns max)
	Interrupt: pin A routed to IRQ 3
	NUMA node: 0
	IOMMU group: 12
	Region 0: Memory at fd9ff000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Kernel modules: saa7134