Linux4Media cineS2 DVB-S2 Twin Tuner: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 138: Line 138:


Also supported by the [[s2-liplianin]] v4l branch.
Also supported by the [[s2-liplianin]] v4l branch.

On RHEL / Centos / Scientific Linux 6.x the card works with video4linux driver >= 20110208_132512-98.el6 from ATRPMS.


==External Links==
==External Links==

Revision as of 15:56, 14 April 2011

A nGene based DVB-S2 PCIe card from Linux4Media

Linux4Media cineS2 DVB-S2 Twin Tuner

Overview/Features

  • Full Linux Support
  • PCI-e x1
  • Dual Tuner DVB-S/S2 card
  • Ultra-Low Profile

Components Used

Other Images

Identification

$ lspci -vvvnn
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720]
	Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
	Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00
	Capabilities: [400] Virtual Channel <?>
	Kernel driver in use: ngene
	Kernel modules: ngene

or:

$ lspci -vvvnn
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720]
	Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
	Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00
	Capabilities: [400] Virtual Channel <?>
	Kernel driver in use: ngene
	Kernel modules: ngene

or:

03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720]  (rev 01)
	Subsystem: Micronas Semiconductor Holding AG Device [18c3:dd00]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-  FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-   <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
	Region 1: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1  unlimited
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00
	Capabilities: [400] Virtual Channel <?>

Making it Work

Make sure that the external power supply is connected!!!

Firmware

$ wget http://www.digitaldevices.de/download/ngene_15.fw
$ cp ngene_15.fw /lib/firmware/

Device [18c3:dd00] needs Firmware >= 18

$ wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw
$ sudo cp ngene_18.fw /lib/firmware

Driver

$ hg clone http://linuxtv.org/hg/v4l-dvb/
$ cd v4l-dvb
$ make
$ make install

Also supported by the s2-liplianin v4l branch.

On RHEL / Centos / Scientific Linux 6.x the card works with video4linux driver >= 20110208_132512-98.el6 from ATRPMS.

External Links

CineS2 DVB-S2 Twin Tuner "Low Profile"