Difference between revisions of "Linux4Media cineS2 DVB-S2 Twin Tuner"
From LinuxTVWiki
Twoofseven (Talk | contribs) m (→External Links) |
m (→External Links: commercial hyperlink removed) |
||
(27 intermediate revisions by 10 users not shown) | |||
Line 1: | Line 1: | ||
− | A [[DVB-S2]] [[DVB-S2 PCIe Cards|PCIe card]] from [[ | + | A [[NGene_devices|nGene]] based [[DVB-S2]] [[DVB-S2 PCIe Cards|PCIe card]] from [[Linux4Media]] |
− | [[Image:Media-Pointer_MP-S2_Front.jpg|right|thumb|200px| | + | [[Image:Media-Pointer_MP-S2_Front.jpg|right|thumb|200px|Linux4Media cineS2 DVB-S2 Twin Tuner ]] |
==Overview/Features== | ==Overview/Features== | ||
+ | * Full Linux Support | ||
* PCI-e x1 | * PCI-e x1 | ||
* Dual Tuner DVB-S/S2 card | * Dual Tuner DVB-S/S2 card | ||
* Ultra-Low Profile | * Ultra-Low Profile | ||
− | ===Components Used=== | + | ===Revision 5.x=== |
+ | |||
+ | ====Components Used==== | ||
* [[NGene_devices|PCIe bridge MICRONAS APB 7202A B2]] | * [[NGene_devices|PCIe bridge MICRONAS APB 7202A B2]] | ||
− | * [[STMicroelectronics_STV0900 | + | * [[STMicroelectronics_STV0900|Dual demodulator STM STV0900B]] |
* [[ST_STV6110A|Tuner STM STV6110A]] | * [[ST_STV6110A|Tuner STM STV6110A]] | ||
* [[Dual LNB STM LNBH24]] | * [[Dual LNB STM LNBH24]] | ||
− | ===Other Images=== | + | ====Other Images==== |
<gallery perrow=5> | <gallery perrow=5> | ||
Image:Media-Pointer_MP-S2_MICRONAS_APB_7202A_B2.jpg|PCIe bridge MICRONAS APB 7202A B2 | Image:Media-Pointer_MP-S2_MICRONAS_APB_7202A_B2.jpg|PCIe bridge MICRONAS APB 7202A B2 | ||
Line 22: | Line 25: | ||
</gallery> | </gallery> | ||
− | ===Identification=== | + | ====Identification==== |
$ lspci -vvvnn | $ lspci -vvvnn | ||
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] | 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] | ||
− | Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3] | + | Subsystem: Micronas Semiconductor Holding AG Device <b>[18c3:abc3]</b> |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | ||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ | ||
Line 31: | Line 34: | ||
Interrupt: pin A routed to IRQ 16 | Interrupt: pin A routed to IRQ 16 | ||
Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] | Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] | ||
− | + | Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] | |
− | Capabilities: < | + | Capabilities: [40] Power Management version 2 |
+ | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | ||
+ | Status: D0 PME-Enable- DSel=0 DScale=0 PME- | ||
+ | Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- | ||
+ | Address: 0000000000000000 Data: 0000 | ||
+ | Capabilities: [58] Express (v1) Endpoint, MSI 00 | ||
+ | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | ||
+ | ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- | ||
+ | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | ||
+ | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ | ||
+ | MaxPayload 128 bytes, MaxReadReq 512 bytes | ||
+ | DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- | ||
+ | LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited | ||
+ | ClockPM- Suprise- LLActRep- BwNot- | ||
+ | LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- | ||
+ | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | ||
+ | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | ||
+ | Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 | ||
+ | Capabilities: [400] Virtual Channel <?> | ||
Kernel driver in use: ngene | Kernel driver in use: ngene | ||
Kernel modules: ngene | Kernel modules: ngene | ||
− | == | + | or: |
− | + | $ lspci -vvvnn | |
− | + | 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] | |
− | + | Subsystem: Micronas Semiconductor Holding AG Device <b>[18c3:abc4]</b> | |
+ | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | ||
+ | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ | ||
+ | Latency: 0, Cache Line Size: 32 bytes | ||
+ | Interrupt: pin A routed to IRQ 16 | ||
+ | Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] | ||
+ | Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] | ||
+ | Capabilities: [40] Power Management version 2 | ||
+ | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | ||
+ | Status: D0 PME-Enable- DSel=0 DScale=0 PME- | ||
+ | Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- | ||
+ | Address: 0000000000000000 Data: 0000 | ||
+ | Capabilities: [58] Express (v1) Endpoint, MSI 00 | ||
+ | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | ||
+ | ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- | ||
+ | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | ||
+ | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ | ||
+ | MaxPayload 128 bytes, MaxReadReq 512 bytes | ||
+ | DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- | ||
+ | LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited | ||
+ | ClockPM- Suprise- LLActRep- BwNot- | ||
+ | LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- | ||
+ | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | ||
+ | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | ||
+ | Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 | ||
+ | Capabilities: [400] Virtual Channel <?> | ||
+ | Kernel driver in use: ngene | ||
+ | Kernel modules: ngene | ||
− | + | or: (Revision V5.5) | |
+ | |||
+ | 03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] (rev 01) | ||
+ | Subsystem: Micronas Semiconductor Holding AG Device '''[18c3:dd00]''' | ||
+ | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | ||
+ | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | ||
+ | Latency: 0, Cache Line Size: 32 bytes | ||
+ | Interrupt: pin A routed to IRQ 10 | ||
+ | Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K] | ||
+ | Region 1: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] | ||
+ | Capabilities: [40] Power Management version 2 | ||
+ | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | ||
+ | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | ||
+ | Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ | ||
+ | Address: 0000000000000000 Data: 0000 | ||
+ | Capabilities: [58] Express (v1) Endpoint, MSI 00 | ||
+ | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | ||
+ | ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- | ||
+ | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | ||
+ | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ | ||
+ | MaxPayload 128 bytes, MaxReadReq 512 bytes | ||
+ | DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- | ||
+ | LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited | ||
+ | ClockPM- Surprise- LLActRep- BwNot- | ||
+ | LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | ||
+ | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | ||
+ | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | ||
+ | Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00 | ||
+ | Capabilities: [400] Virtual Channel <?> | ||
+ | |||
+ | |||
+ | ===Revision 6.2=== | ||
+ | Revision 6.2 differs significantly from the previous versions. Instead of the micronas PCIe-bridge there is now the [http://www.latticesemi.com/products/fpga/ecp3/index.cfm Lattice ECP3-FCPGA]. The | ||
+ | |||
+ | ====Components Used==== | ||
+ | * [[Lattice ECP3]] | ||
+ | * [[STMicroelectronics_STV0900|Dual demodulator STM STV0900B]] | ||
+ | * [[ST_STV6110A|Tuner STM STV6110A]] | ||
+ | * [[Dual LNB STM LNBH24]] | ||
+ | |||
+ | ====Other Images==== | ||
+ | <gallery perrow=5> | ||
+ | [[File:Example.jpg]] | ||
+ | </gallery> | ||
+ | |||
+ | ====Identification==== | ||
+ | $ lspci -vvvnn | ||
+ | 03:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus LE DVB adapter [dd01:0003] | ||
+ | Subsystem: Digital Devices GmbH Device [dd01:0020] | ||
+ | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- | ||
+ | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | ||
+ | Latency: 0, Cache Line Size: 64 bytes | ||
+ | Interrupt: pin A routed to IRQ 11 | ||
+ | Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] | ||
+ | Capabilities: [50] Power Management version 3 | ||
+ | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | ||
+ | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | ||
+ | Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+ | ||
+ | Address: 0000000000000000 Data: 0000 | ||
+ | Capabilities: [90] Express (v2) Endpoint, MSI 00 | ||
+ | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | ||
+ | ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | ||
+ | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | ||
+ | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- | ||
+ | MaxPayload 128 bytes, MaxReadReq 512 bytes | ||
+ | DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- | ||
+ | LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 <1us | ||
+ | ClockPM- Surprise- LLActRep- BwNot- | ||
+ | LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | ||
+ | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | ||
+ | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | ||
+ | DevCap2: Completion Timeout: Range A, TimeoutDis+ | ||
+ | DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- | ||
+ | LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB | ||
+ | Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | ||
+ | Compliance De-emphasis: -6dB | ||
+ | LnkSta2: Current De-emphasis Level: -6dB | ||
+ | Capabilities: [100] Vendor Specific Information <?> | ||
+ | |||
+ | Kernel driver in use: DDBridge | ||
+ | Kernel modules: ddbridge | ||
+ | |||
+ | ==Making it Work== | ||
Make sure that the external power supply is connected!!! | Make sure that the external power supply is connected!!! | ||
− | + | ===Firmware=== | |
− | + | ||
− | + | $ wget http://www.digitaldevices.de/download/ngene_15.fw | |
+ | $ cp ngene_15.fw /lib/firmware/ | ||
− | + | Device [18c3:dd00] needs Firmware >= 18 | |
− | + | $ wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw | |
− | + | $ sudo cp ngene_18.fw /lib/firmware | |
− | + | ===Driver=== | |
− | + | ||
− | + | $ hg clone http://linuxtv.org/hg/v4l-dvb/ | |
+ | $ cd v4l-dvb | ||
+ | $ make | ||
+ | $ make install | ||
− | + | Also supported by the [[s2-liplianin]] v4l branch. | |
− | + | ||
− | + | On RHEL / Centos / Scientific Linux 6.x the card works with video4linux driver RPM >= 20110208_132512-98.el6 from ATRPMS Repository. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
==External Links== | ==External Links== | ||
− | [http:// | + | [http://digitaldevices.de/Cine_S2.html CineS2 DVB-S2 Twin Tuner "Low Profile"] |
[[Category:DVB-S2 PCIe Cards]] | [[Category:DVB-S2 PCIe Cards]] |
Latest revision as of 11:25, 20 October 2013
A nGene based DVB-S2 PCIe card from Linux4Media
Contents
Overview/Features
- Full Linux Support
- PCI-e x1
- Dual Tuner DVB-S/S2 card
- Ultra-Low Profile
Revision 5.x
Components Used
- PCIe bridge MICRONAS APB 7202A B2
- Dual demodulator STM STV0900B
- Tuner STM STV6110A
- Dual LNB STM LNBH24
Other Images
Identification
$ lspci -vvvnn 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 Capabilities: [400] Virtual Channel <?> Kernel driver in use: ngene Kernel modules: ngene
or:
$ lspci -vvvnn 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 Capabilities: [400] Virtual Channel <?> Kernel driver in use: ngene Kernel modules: ngene
or: (Revision V5.5)
03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] (rev 01) Subsystem: Micronas Semiconductor Holding AG Device [18c3:dd00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [400] Virtual Channel <?>
Revision 6.2
Revision 6.2 differs significantly from the previous versions. Instead of the micronas PCIe-bridge there is now the Lattice ECP3-FCPGA. The
Components Used
Other Images
Identification
$ lspci -vvvnn 03:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus LE DVB adapter [dd01:0003] Subsystem: Digital Devices GmbH Device [dd01:0020] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [90] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range A, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: DDBridge Kernel modules: ddbridge
Making it Work
Make sure that the external power supply is connected!!!
Firmware
$ wget http://www.digitaldevices.de/download/ngene_15.fw $ cp ngene_15.fw /lib/firmware/
Device [18c3:dd00] needs Firmware >= 18
$ wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw $ sudo cp ngene_18.fw /lib/firmware
Driver
$ hg clone http://linuxtv.org/hg/v4l-dvb/ $ cd v4l-dvb $ make $ make install
Also supported by the s2-liplianin v4l branch.
On RHEL / Centos / Scientific Linux 6.x the card works with video4linux driver RPM >= 20110208_132512-98.el6 from ATRPMS Repository.