Difference between revisions of "Meye"
m (9 revision(s))
Revision as of 04:37, 7 November 2008
Vaio Picturebook Motion Eye Camera Driver Readme
- Copyright (C) 2001-2004 Stelian Pop <email@example.com>
- Copyright (C) 2001-2002 Alcôve <www.alcove.com>
- Copyright (C) 2000 Andrew Tridgell <firstname.lastname@example.org>
This driver enables the use of video4linux compatible applications with the Motion Eye camera. This driver requires the "Sony Vaio Programmable I/O Control Device" driver (which can be found in the "Character drivers" section of the kernel configuration utility) to be compiled and installed (using its "camera=1" parameter).
It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
Grabbing is supported in packed YUV colorspace only.
MJPEG hardware grabbing is supported via a private API (see below).
This driver supports the 'second' version of the MotionEye camera :)
The first version was connected directly on the video bus of the Neomagic video card and is unsupported.
The second one, made by Kawasaki Steel is fully supported by this driver (PCI vendor/device is 0x136b/0xff01)
The third one, present in recent (more or less last year) Picturebooks (C1M* models), is not supported. The manufacturer has given the specs to the developers under a NDA (which allows the develoment of a GPL driver however), but things are not moving very fast (see http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
There is a forth model connected on the USB bus in TR1* Vaio laptops. This camera is not supported at all by the current driver, in fact little information if any is available for this camera (USB vendor/device is 0x054c/0x0107).
Several options can be passed to the meye driver using the standard module argument syntax (<param>=<value> when passing the option to the module or meye.<param>=<value> on the kernel boot line when meye is statically linked into the kernel). Those options are:
forcev4l1: force use of V4L1 API instead of V4L2 gbuffers: number of capture buffers, default is 2 (32 max) gbufsize: size of each capture buffer, default is 614400 video_nr: video device to register (0 = /dev/video0, etc)
In order to automatically load the meye module on use, you can put those lines in your /etc/modprobe.conf file:
alias char-major-81 videodev alias char-major-81-0 meye options meye gbuffers=32
xawtv >= 3.49 (<http://bytesex.org/xawtv/>) for display and uncompressed video capture:
xawtv -c /dev/video0 -geometry 640x480
xawtv -c /dev/video0 -geometry 320x240
motioneye (<http://popies.net/meye/>) for getting ppm or jpg snapshots, mjpeg video
The driver supports frame grabbing with the video4linux API (either v4l1 or v4l2), so all video4linux tools (like xawtv) should work with this driver.
Besides the video4linux interface, the driver has a private interface for accessing the Motion Eye extended parameters (camera sharpness, agc, video framerate), the shapshot and the MJPEG capture facilities.
This interface consists of several ioctls (prototypes and structures can be found in include/linux/meye.h):
MEYEIOC_G_PARAMS MEYEIOC_S_PARAMS Get and set the extended parameters of the motion eye camera. The user should always query the current parameters with MEYEIOC_G_PARAMS, change what he likes and then issue the MEYEIOC_S_PARAMS call (checking for -EINVAL). The extended parameters are described by the meye_params structure.
MEYEIOC_QBUF_CAPT Queue a buffer for capture (the buffers must have been obtained with a VIDIOCGMBUF call and mmap'ed by the application). The argument to MEYEIOC_QBUF_CAPT is the buffer number to queue (or -1 to end capture). The first call to MEYEIOC_QBUF_CAPT starts the streaming capture.
MEYEIOC_SYNC Takes as an argument the buffer number you want to sync. This ioctl blocks until the buffer is filled and ready for the application to use. It returns the buffer size.
MEYEIOC_STILLCAPT MEYEIOC_STILLJCAPT Takes a snapshot in an uncompressed or compressed jpeg format. This ioctl blocks until the snapshot is done and returns (for jpeg snapshot) the size of the image. The image data is available from the first mmap'ed buffer.
Look at the 'motioneye' application code for an actual example.
Bugs / Todo
- the driver could be much cleaned up by removing the v4l1 support. However, this means all v4l1-only applications will stop working.
- 'motioneye' still uses the meye private v4l1 API extensions.