Mumudvb

From LinuxTVWiki
Revision as of 10:07, 28 March 2006 by Braice (talk | contribs)
Jump to navigation Jump to search

Mumudvb is a program who can redistribute stream from DVB on a network, in multicast. It's main feature is to take a whole transponder and put each channel on different multicast IP.

For further information see : http://mumudvb.braice.net/

main features

* Can show reception level when streaming
* To make a list of channels in real time (can be used to make SAP announces)
* Can deamonize and write his own pid in a file
* The program can kill himself if he receives no data from the card
* The program stops trying tuning after a configurable timeout
* The main fonctionality : stream channels from a transponder on different multicast IPs
* Can stream the same pid on different channels (multicast Ip)
* Functionnal support of DVB-T
* Always send mandatory pids
 * Mandatory pids are :
  * PAT (0): Program Association Table
  * NIT (16) : Network Information Table : It is intended to provide information about the physical network.
  * SDT (17) : Service Description Table : the SDT contains data describing the services in the system e.g. names of services, the service provider, etc.
  * EIT (18) : Event Information Table : the EIT contains data concerning events or programmes such as event name, start time, duration, etc.
  * TDT (20): Time and Date Table : the TDT gives information relating to the present time and date.This information is given in a separate table due to the frequent updating of this information.
* mumudvb automatically suscribe to all multicast groups (IGMP membership request) in order to avoid some switches to broadcast all channels.
* The program can rewrite the PAT Pid in order to announce only present channels (useful for set-top boxes)
 * This is an experimental feature (03/2006) and dont rewrite Pat Pids larger than 188 bytes