Difference between revisions of "PcHDTV"

From LinuxTVWiki
Jump to: navigation, search
m
(Mini HOW-TOs)
Line 6: Line 6:
   
 
== Mini HOW-TOs ==
 
== Mini HOW-TOs ==
  +
'''How do I scan for QAM channels?'''
  +
<blockquote>
  +
pcHDTV 3000 supports unencrypted [[QAM]] channels over cable. You must have the [[DVB]] module drivers (cx88_dvb) loaded to use QAM. [TODO add link to pcHDTV forums on DVB driver installation.] To scan for QAM channels:
  +
  +
<blockquote>
  +
1. Install the 'dvb-apps' tools from cvs. See http://www.linuxtv.org.
  +
  +
<blockquote>
  +
TODO add cvs instructions
  +
</blockquote>
  +
  +
2. Save 'http://www.digitalregime.com/patches/channels.conf-qam-correct' to '~/.azap/channels.conf'.
  +
</blockquote>
  +
  +
You should be able to scan for QAM channels using 'azap' from the dvb-apps. Run 'azap [channel]' to scan for a specified channel, e.g., 'azap c80'. Cable channels typically begin at 80. A FE_HAS_LOCK indicates a signal lock on channel.
  +
<br><br>
  +
MythTV 0.17 supports automagic scanning of DVB channels. Make sure you compile it with DVB support.
  +
</blockquote>
  +
  +
'''How do I know if a QAM channel is encrypted?'''
  +
<blockquote>
  +
There does not seem to be a way to tell for certain. See this [http://www.linuxtv.org/pipermail/linux-dvb/2005-March/000460.html post] and this [http://www.linuxtv.org/pipermail/linux-dvb/2005-March/000557.html reply] (March, 2005).
  +
</blockquote>
  +
  +
'''How do I record a stream from DVB?'''
  +
<blockquote>
  +
You can use dvbstream and dtvstream. See this [http://www.xmission.com/~pchdtv/forum/viewtopic.php?t=591 post] (March 19, 2005).
  +
</blockquote>
   
 
== Links ==
 
== Links ==

Revision as of 20:47, 20 March 2005

A U.S. based DVB Card Vendor that produces ATSC HDTV PCI cards and claims explicitly that they are working under Linux.

FAQ

TODO...

Mini HOW-TOs

How do I scan for QAM channels?

pcHDTV 3000 supports unencrypted QAM channels over cable. You must have the DVB module drivers (cx88_dvb) loaded to use QAM. [TODO add link to pcHDTV forums on DVB driver installation.] To scan for QAM channels:

1. Install the 'dvb-apps' tools from cvs. See http://www.linuxtv.org.

TODO add cvs instructions

2. Save 'http://www.digitalregime.com/patches/channels.conf-qam-correct' to '~/.azap/channels.conf'.

You should be able to scan for QAM channels using 'azap' from the dvb-apps. Run 'azap [channel]' to scan for a specified channel, e.g., 'azap c80'. Cable channels typically begin at 80. A FE_HAS_LOCK indicates a signal lock on channel.

MythTV 0.17 supports automagic scanning of DVB channels. Make sure you compile it with DVB support.

How do I know if a QAM channel is encrypted?

There does not seem to be a way to tell for certain. See this post and this reply (March, 2005).

How do I record a stream from DVB?

You can use dvbstream and dtvstream. See this post (March 19, 2005).

Links

http://www.pchdtv.com/