Pinnacle PCTV (310i): Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
mNo edit summary
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
An [[hybrid]] Analog/[[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[Pinnacle]]
[http://linuxtv.org/v4lwiki/index.php/Pinnacle Pinnacle]


It is supported under Linux.
The Pinnacle PCTV 310i is a DVB-T-ready analogue/digital internal TV tuner card, with remote control.


{{Note|There is currently a bit of info for this device also in the [[Pinnacle PCTV (310i)-redundant]] article}}
==Card features==
⚫
* PCI Rev. 2.3 interface
⚫
* Video/audio decoder: [http://www.semiconductors.philips.com/pip/SAA7133.html Philips SAA7133] ([http://www.semiconductors.philips.com/acrobat/datasheets/SAA7133HL_1.pdf datasheet])
* Analog demodulator: [http://www.semiconductors.philips.com/pip/TDA9887.html TDA 9887] ([http://www.semiconductors.philips.com/acrobat/datasheets/TDA9887_3.pdf datasheet])
* TV tuner: [http://www.emedialive.com/Articles/ReadArticle.aspx?ArticleID=8381 Microtune MT2050] ([http://www.microtune.com/products/pdf/MT2050_Tuner_IC.pdf datasheet])
⚫
* DVB-T demodulator: [http://products.zarlink.com/product_profiles/MT352.htm Zarlink MT352], ([http://products.zarlink.com/product_profiles/MT352.htm datasheet])


==Overview/Features==
⚫
==Card connectors==
⚫
* PCI Rev. 2.3 interface
* remote control.
⚫
Card connectors:
* TV signal: IEC connector (PAL/SECAM)
* TV signal: IEC connector (PAL/SECAM)
* Video Inputs: S-Video, Composite Video (RCA socket via adaptor)
* Video Inputs: S-Video, Composite Video (RCA socket via adaptor)
* Audio Outputs: Internal 4 pin header 2.8 mm (to sound board; only required for analogue TV)
* Audio Outputs: Internal 4 pin header 2.8 mm (to sound board; only required for analogue TV)
* IR-Remote input: 2.5 mm stereo socket
* IR-Remote input: 2.5 mm stereo socket

==lspci -v==
===Components Used===
⚫
04:08.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
* [[Microtune MT2050]] tuner
* [[NXP TDA9887|NXP/Philips TDA9887]] (analog demodulator) [http://www.semiconductors.philips.com/pip/TDA9887.html]
⚫
* [[Intel]]/[[Zarlink MT352]] (DVB-T demodulator) [http://products.zarlink.com/product_profiles/MT352.htm datasheet]
⚫
* [[NXP SAA7133|NXP/Philips]] SAA7133HL Video/audio decoder: [http://www.semiconductors.philips.com/pip/SAA7133.html Philips SAA7133]

===Identification===
Outputo of ''lspci -v''
⚫
04:08.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
Subsystem: Pinnacle Systems Inc. Unknown device 002f
Subsystem: Pinnacle Systems Inc. Unknown device 002f
Flags: bus master, medium devsel, latency 32, IRQ 58
Flags: bus master, medium devsel, latency 32, IRQ 58
Line 22: Line 28:
Capabilities: [40] Power Management version 2
Capabilities: [40] Power Management version 2


==Firmware==
==Making it Work==

===Firmware===


if you get:
if you get:
Line 38: Line 46:
and copy the resulting files to /lib/firmware (need to use the chmod)
and copy the resulting files to /lib/firmware (need to use the chmod)


==Module Options==
===Drivers===
the card is autodetected with lastest mercurial
The card should be autodetected.


for the dvb frontend you must load manually with:
For the dvb frontend, you may have to load it manually with the module option:
modprobe saa7134-dvb
modprobe saa7134-dvb


⚫
==Sample Kernel Output==
it would prompt:
⚫
DVB: registering new adapter (saa7133[0]).
⚫
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

⚫
==Kernel output==
saa7133[0]: found at 0000:04:08.0, rev: 208, irq: 58, latency: 32, mmio: 0xfdbfe000
saa7133[0]: found at 0000:04:08.0, rev: 208, irq: 58, latency: 32, mmio: 0xfdbfe000
saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
Line 70: Line 74:
saa7134 ALSA driver for DMA sound loaded
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xfdbfe000 irq 58 registered as card -1
saa7133[0]/alsa: saa7133[0] at 0xfdbfe000 irq 58 registered as card -1
⚫
DVB: registering new adapter (saa7133[0]).
⚫
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...


===Notes===
* Works for analogue TV AND digital, but FM Radio only works with tuner=38.


==Note==
===Known Bugs===
* With Pinnacle PCTV Hybrid Pro PCI the remote chip on 0x47/0x8e is not detected.
Works analogue tv AND digital.
<gallery>
Only FM Radio with tuner=38.
Image:Pinnacle_PCTV_Hybrid_Pro_PCI_front.jpg|Pinnacle PCTV Hybrid Pro PCI: front

Image:Pinnacle_PCTV_Hybrid_Pro_PCI_particular.jpg|Pinnacle PCTV Hybrid Pro PCI: particular
⚫
==Links==
Image:Pinnacle_PCTV_Hybrid_Pro_PCI_back.jpg|Pinnacle PCTV Hybrid Pro PCI: back
</gallery>


⚫
==External Links==
* [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm PCTV 310i Product homepage] - general info from Pinnacle about the product
* [http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+310i.htm PCTV 310i Product homepage] - general info from Pinnacle about the product
* [http://www.pinnaclesys.com/documents/ConsumerProducts/PCTVTuners/PCTVAnalogDigitalPVR/uk/Datasheet_PCTV_310i_UK_07June05.pdf Pinnacle PCTV 310i datasheet]
* [http://www.pinnaclesys.com/documents/ConsumerProducts/PCTVTuners/PCTVAnalogDigitalPVR/uk/Datasheet_PCTV_310i_UK_07June05.pdf Pinnacle PCTV 310i datasheet]
[[Category:DVB-T PCI Cards]]

Latest revision as of 11:36, 20 February 2010

An hybrid Analog/DVB-T PCI card from Pinnacle

It is supported under Linux.

Note: There is currently a bit of info for this device also in the Pinnacle PCTV (310i)-redundant article

Overview/Features

  • PCI Rev. 2.3 interface
  • remote control.

Card connectors:

  • TV signal: IEC connector (PAL/SECAM)
  • Video Inputs: S-Video, Composite Video (RCA socket via adaptor)
  • Audio Outputs: Internal 4 pin header 2.8 mm (to sound board; only required for analogue TV)
  • IR-Remote input: 2.5 mm stereo socket

Components Used

Identification

Outputo of lspci -v 

04:08.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
       Subsystem: Pinnacle Systems Inc. Unknown device 002f
       Flags: bus master, medium devsel, latency 32, IRQ 58
       Memory at fdbfe000 (32-bit, non-prefetchable) [size=2K]
       Capabilities: [40] Power Management version 2

Making it Work

Firmware

if you get: 

  DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
  tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
  tda1004x: no firmware upload (timeout or file not found?)
  tda1004x: firmware upload failed

you must run the get_dvb_firmware script in v4l-dvb/linux/Documentation/dvb (from mercurial) 

  get_dvb_firmware tda10045
  get_dvb_firmware tda10046

and copy the resulting files to /lib/firmware (need to use the chmod)

Drivers

The card should be autodetected.

For the dvb frontend, you may have to load it manually with the module option: 

   modprobe saa7134-dvb

Sample Kernel Output

   saa7133[0]: found at 0000:04:08.0, rev: 208, irq: 58, latency: 32, mmio: 0xfdbfe000
   saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
   saa7133[0]: board init: gpio is 600e000
   input: Pinnacle PCTV as /class/input/input3
   ir-kbd-i2c: Pinnacle PCTV detected at i2c-0/0-0047/ir0 [saa7133[0]]
   saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
   saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c db 54 ff ff
   saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2
   saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 45 ca 2e
   saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   tuner 0-004b: chip found @ 0x96 (saa7133[0])
   tuner 0-004b: setting tuner address to 61
   tuner 0-004b: type set to tda8290+75a
   saa7133[0]: registered device video0 [v4l2]
   saa7133[0]: registered device vbi0
   saa7133[0]: registered device radio0
   saa7134 ALSA driver for DMA sound loaded
   saa7133[0]/alsa: saa7133[0] at 0xfdbfe000 irq 58 registered as card -1
   DVB: registering new adapter (saa7133[0]).
   DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

Notes

  • Works for analogue TV AND digital, but FM Radio only works with tuner=38.

Known Bugs

  • With Pinnacle PCTV Hybrid Pro PCI the remote chip on 0x47/0x8e is not detected.
  • Pinnacle PCTV Hybrid Pro PCI: front

    Pinnacle PCTV Hybrid Pro PCI: front

  • Pinnacle PCTV Hybrid Pro PCI: particular

    Pinnacle PCTV Hybrid Pro PCI: particular

  • Pinnacle PCTV Hybrid Pro PCI: back

    Pinnacle PCTV Hybrid Pro PCI: back

External Links

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=Pinnacle_PCTV_(310i)&oldid=26716"