Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)

File:Filename

caption

This article is a stub or is incomplete.

This article requires expansion. Please help add informative information if you can.

A hybrid DVB-T PCIe card from Pinnacle.

It is currently not supported under Linux.

Overview/Features

- PCi-express card - 2 independant Hybrid (DVB-T, analog TV, analog Radio) decoders (2x Antenna connector in) - 1 S-video IN - 1 Internal Audio In connector - 1 Internal Audio Out connector - 1 Internal Vidéo In connector - IR Remote control (Receiptor plugs in card by mini-jack connector)

Components Used

Main component :

Chip Philips SAA7162E/G SB4740.1 SB4740.1 Q521HRZ ZSG05391X

+ 2 little chips Philips TDA1004GA SA5727.1 05 ZSG 05141

Identification

Here is the result of the lspci -v command on my PC :

02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7162

       Subsystem: Pinnacle Systems Inc. Unknown device 0100
       Flags: bus master, fast devsel, latency 0, IRQ 10
       Memory at fdb00000 (64-bit, non-prefetchable) [size=1M]
       Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
       Capabilities: [50] Express Endpoint IRQ 0
       Capabilities: [74] Power Management version 2
       Capabilities: [80] Vendor Specific Information

Other Images

• 

  front

• 

  front 2

• 

  front 3

• 

  rear

• 

  front-connectors

• 

  front 4

• 

  front 5

• 

  rear 2

• ...

Making it Work

Firmware

is there any firmware specific information for this device? if so, list it here ... this means you

Drivers

The directlink driver file is here - WinXP 32bits The homepage of all pinnacle drivers is here

Sample kernel output

provide the relevant portion of dmesg here

Currently, the result of the dmesg command :

link dmesg

Remote Control Support

discuss support for the remote control here

External Links

• UK product page
• Fr product page