Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i): Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 66: Line 66:


===Firmware===
===Firmware===

''is there any firmware specific information for this device? if so, list it here ... this means you''
?


===Drivers===
===Drivers===

Revision as of 22:53, 20 January 2008


This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.


A hybrid DVB-T PCIe card from Pinnacle.

It is currently not supported under Linux.

Overview/Features

- PCi-express card - 2 independant Hybrid (DVB-T, analog TV, analog Radio) decoders (2x Antenna connector in) - 1 S-video IN - 1 Internal Audio In connector - 1 Internal Audio Out connector - 1 Internal Vidéo In connector - IR Remote control (Receiptor plugs in card by mini-jack connector)


Components Used

Main component :

Chip Philips SAA7162E/G SB4740.1 SB4740.1 Q521HRZ ZSG05391X

+ 2 little chips Philips TDA1004GA SA5727.1 05 ZSG 05141

Identification

Here is the result of the lspci -v command on my PC :

 02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7162
       Subsystem: Pinnacle Systems Inc. Unknown device 0100
       Flags: bus master, fast devsel, latency 0, IRQ 10
       Memory at fdb00000 (64-bit, non-prefetchable) [size=1M]
       Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
       Capabilities: [50] Express Endpoint IRQ 0
       Capabilities: [74] Power Management version 2
       Capabilities: [80] Vendor Specific Information

NB: with lspci -vn I have no informations about the card ?

Other Images

Making it Work

Firmware

?

Drivers

The directlink driver file is here - WinXP 32bits The homepage of all pinnacle drivers is here

Sample kernel output

provide the relevant portion of dmesg here

Currently, the result of the dmesg command :

link dmesg

Remote Control Support

discuss support for the remote control here

External Links