Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)

File:Filename

caption

This article is a stub or is incomplete.

This article requires expansion. Please help add informative information if you can.

A hybrid DVB-T PCIe card from Pinnacle.

It is currently not supported under Linux.

Overview/Features

- PCi-express card - 2 independant Hybrid (DVB-T, analog TV, analog Radio) decoders (2x Antenna connector in) - 1 S-video IN - 1 Internal Audio In connector - 1 Internal Audio Out connector - 1 Internal Vidéo In connector - IR Remote control (Receiptor plugs in card by mini-jack connector)

Components Used

Main component :

Chip Philips SAA7162E/G SB4740.1 SB4740.1 Q521HRZ ZSG05391X

+ 2 little chips Philips TDA1004GA SA5727.1 05 ZSG 05141

Identification

Here is the result of the lspci -v command on my PC :

 02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7162
       Subsystem: Pinnacle Systems Inc. Unknown device 0100
       Flags: bus master, fast devsel, latency 0, IRQ 10
       Memory at fdb00000 (64-bit, non-prefetchable) [size=1M]
       Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
       Capabilities: [50] Express Endpoint IRQ 0
       Capabilities: [74] Power Management version 2
       Capabilities: [80] Vendor Specific Information

NB: with lspci -vn I have no informations about the card ?

Other Images

• 

  front

• 

  front 2

• 

  front 3

• 

  rear

• 

  front-connectors

• 

  front 4

• 

  front 5

• 

  rear 2

• ...

Making it Work

Firmware

?

Drivers

The directlink driver file is here - WinXP 32bits The homepage of all pinnacle drivers is here

Sample kernel output

Currently, the result of the dmesg command :

[ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 05:28:27 UTC 2007 (Ubuntu 2.6.22-14.47-generic) [ 0.000000] Command line: root=UUID=59977ef0-6171-4604-90d8-2ea68b745152 ro quiet splash locale=fr_FR [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524016) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F77C0 checksum 0 [ 0.000000] ACPI: RSDP 000F77C0, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT 7FEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEF9740, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEF3240, 64AC (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FEF0000, 0040 [ 0.000000] ACPI: HPET 7FEF9980, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 7FEF9A00, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FEF9880, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524016) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524016 [ 0.000000] On node 0 totalpages: 523919 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512812 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515630 [ 0.000000] Kernel command line: root=UUID=59977ef0-6171-4604-90d8-2ea68b745152 ro quiet splash locale=fr_FR [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 27.055192] time.c: Detected 1999.977 MHz processor. [ 27.056174] Console: colour VGA+ 80x25 [ 27.056191] Checking aperture... [ 27.056201] Calgary: detecting Calgary via BIOS EBDA area [ 27.056203] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 27.073419] Memory: 2055048k/2096064k available (2274k kernel code, 40628k reserved, 1181k data, 296k init) [ 27.073461] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 27.153192] Calibrating delay using timer specific routine.. 4003.42 BogoMIPS (lpj=8006856) [ 27.153220] Security Framework v1.0.0 initialized [ 27.153227] SELinux: Disabled at boot. [ 27.153418] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 27.154624] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.155210] Mount-cache hash table entries: 256 [ 27.155345] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.155348] CPU: L2 cache: 2048K [ 27.155350] CPU 0/0 -> Node 0 [ 27.155352] using mwait in idle threads. [ 27.155354] CPU: Physical Processor ID: 0 [ 27.155355] CPU: Processor Core ID: 0 [ 27.155361] CPU0: Thermal monitoring enabled (TM1) [ 27.155371] SMP alternatives: switching to UP code [ 27.155627] Early unpacking initramfs... done [ 27.485370] ACPI: Core revision 20070126 [ 27.485413] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.531077] Using local APIC timer interrupts. [ 27.581080] result 12499856 [ 27.581081] Detected 12.499 MHz APIC timer. [ 27.581234] SMP alternatives: switching to SMP code [ 27.581311] Booting processor 1/2 APIC 0x1 [ 27.591573] Initializing CPU#1 [ 27.669181] Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=8000183) [ 27.669187] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.669189] CPU: L2 cache: 2048K [ 27.669191] CPU 1/1 -> Node 0 [ 27.669193] CPU: Physical Processor ID: 0 [ 27.669194] CPU: Processor Core ID: 1 [ 27.669199] CPU1: Thermal monitoring enabled (TM1) [ 27.669470] Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02 [ 27.669536] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 27.693195] Brought up 2 CPUs [ 27.722449] migration_cost=45 [ 27.722606] NET: Registered protocol family 16 [ 27.722677] ACPI: bus type pci registered [ 27.722682] PCI: Using configuration type 1 [ 27.724036] ACPI: EC: Look up EC in DSDT [ 27.730578] ACPI: Interpreter enabled [ 27.730581] ACPI: (supports S0 S1 S3 S4 S5) [ 27.730598] ACPI: Using IOAPIC for interrupt routing [ 27.740124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.740137] PCI: Probing PCI hardware (bus 00) [ 27.741958] PCI: Transparent bridge - 0000:00:10.0 [ 27.742013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.742298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 27.817155] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.817324] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.817490] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 27.817652] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.817820] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) [ 27.817984] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 27.818147] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15) [ 27.818316] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.818480] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 27.818642] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.818806] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 27.818974] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.819138] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 27.819300] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.819463] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.819627] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 27.819791] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 27.819953] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 27.820117] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 27.820285] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 27.820485] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 27.820676] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 27.820867] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 27.821056] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 27.821250] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 [ 27.821440] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 27.821630] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 27.821823] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 27.822013] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 27.822204] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 27.822395] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 27.822585] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 27.822776] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 27.822967] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 27.823158] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 27.823349] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 27.823539] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 27.823730] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 27.823923] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 27.824115] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 27.824308] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 27.824414] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.824425] pnp: PnP ACPI init [ 27.824433] ACPI: bus type pnp registered [ 27.828725] pnp: PnP ACPI: found 12 devices [ 27.828727] ACPI: ACPI bus type pnp unregistered [ 27.828777] PCI: Using ACPI for IRQ routing [ 27.828780] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.828897] NET: Registered protocol family 8 [ 27.828898] NET: Registered protocol family 20 [ 27.828916] PCI-GART: No AMD northbridge found. [ 27.828923] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 27.828927] hpet0: 3 32-bit timers, 25000000 Hz [ 27.829984] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 27.829987] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 27.829989] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 27.829992] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 27.829994] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 27.829997] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 27.829999] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 27.830008] pnp: 00:0a: iomem range 0xf0000000-0xf1ffffff could not be reserved [ 27.830013] pnp: 00:0b: iomem range 0xda000-0xdbfff has been reserved [ 27.830015] pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 27.830018] pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 27.830020] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 27.830313] PCI: Bridge: 0000:00:03.0 [ 27.830315] IO window: d000-dfff [ 27.830319] MEM window: fa000000-fcffffff [ 27.830322] PREFETCH window: e0000000-efffffff [ 27.830325] PCI: Bridge: 0000:00:06.0 [ 27.830327] IO window: b000-bfff [ 27.830331] MEM window: fdb00000-fdbfffff [ 27.830334] PREFETCH window: fda00000-fdafffff [ 27.830337] PCI: Bridge: 0000:00:07.0 [ 27.830339] IO window: e000-efff [ 27.830342] MEM window: fdf00000-fdffffff [ 27.830345] PREFETCH window: fde00000-fdefffff [ 27.830348] PCI: Bridge: 0000:00:10.0 [ 27.830350] IO window: c000-cfff [ 27.830354] MEM window: fdd00000-fddfffff [ 27.830358] PREFETCH window: fdc00000-fdcfffff [ 27.830370] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 27.830379] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 27.830388] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 27.830397] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 27.830406] NET: Registered protocol family 2 [ 27.833179] Time: tsc clocksource has been installed. [ 27.873257] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 27.873962] TCP established hash table entries: 262144 (order: 10, 6291456 bytes) [ 27.876893] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 27.877410] TCP: Hash tables configured (established 262144 bind 65536) [ 27.877413] TCP reno registered [ 27.893340] checking if image is initramfs... it is [ 28.543895] Freeing initrd memory: 7202k freed [ 28.548136] audit: initializing netlink socket (disabled) [ 28.548154] audit(1200762756.432:1): initialized [ 28.550040] VFS: Disk quotas dquot_6.5.1 [ 28.550085] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 28.550164] io scheduler noop registered [ 28.550166] io scheduler anticipatory registered [ 28.550167] io scheduler deadline registered [ 28.550251] io scheduler cfq registered (default) [ 28.578429] Boot video device is 0000:01:00.0 [ 28.578556] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 28.578592] assign_interrupt_mode Found MSI capability [ 28.578595] Allocate Port Service[0000:00:03.0:pcie00] [ 28.578670] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 28.578706] assign_interrupt_mode Found MSI capability [ 28.578708] Allocate Port Service[0000:00:06.0:pcie00] [ 28.578779] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 28.578815] assign_interrupt_mode Found MSI capability [ 28.578817] Allocate Port Service[0000:00:07.0:pcie00] [ 28.597273] Real Time Clock Driver v1.12ac [ 28.597459] hpet_resources: 0xfeff0000 is busy [ 28.597497] Linux agpgart interface v0.102 (c) Dave Jones [ 28.597500] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.597604] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.598136] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.598722] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.598923] input: Macintosh mouse button emulation as /class/input/input0 [ 28.599021] PNP: No PS/2 controller found. Probing ports directly. [ 28.599506] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.599510] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 28.599617] mice: PS/2 mouse device common for all mice [ 28.599753] TCP cubic registered [ 28.599799] NET: Registered protocol family 1 [ 28.600009] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.600016] Freeing unused kernel memory: 296k freed [ 29.751134] AppArmor: AppArmor initialized<5>audit(1200762757.636:2): type=1505 info="AppArmor initialized" pid=1279 [ 29.756668] fuse init (API version 7.8) [ 29.760189] Failure registering capabilities with primary security module. [ 29.783893] ACPI: Fan [FAN] (on) [ 29.787191] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.787200] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 29.788396] ACPI: Thermal Zone [THRM] (40 C) [ 30.213632] SCSI subsystem initialized [ 30.227724] libata version 2.21 loaded. [ 30.227811] usbcore: registered new interface driver usbfs [ 30.227830] usbcore: registered new interface driver hub [ 30.227850] usbcore: registered new device driver usb [ 30.228417] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.228778] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 30.228784] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 30.229250] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.229254] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 30.229365] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 30.229383] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 30.235040] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 30.292055] usb usb1: configuration #1 chosen from 1 choice [ 30.292079] hub 1-0:1.0: USB hub found [ 30.292087] hub 1-0:1.0: 8 ports detected [ 30.397683] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 30.397694] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 [ 30.397701] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 30.397712] forcedeth: using HIGHDMA [ 30.705123] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 30.911963] usb 1-2: configuration #1 chosen from 1 choice [ 30.921421] eth0: forcedeth.c: subsystem: 01043:8221 bound to 0000:00:14.0 [ 30.921795] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 30.921802] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21 [ 30.922240] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 30.922245] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 30.922294] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 30.922323] ehci_hcd 0000:00:0b.1: debug port 1 [ 30.922328] PCI: cache line size of 32 is not supported by device 0000:00:0b.1 [ 30.922340] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 30.922348] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 30.922433] usb usb2: configuration #1 chosen from 1 choice [ 30.922454] hub 2-0:1.0: USB hub found [ 30.922460] hub 2-0:1.0: 8 ports detected [ 31.029323] ahci 0000:03:00.0: version 2.2 [ 31.029326] sata_nv 0000:00:0e.0: version 3.4 [ 31.029666] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 31.029674] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 31.030157] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 31.030252] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 31.030260] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16 [ 31.030539] scsi0 : sata_nv [ 31.030815] scsi1 : sata_nv [ 31.030898] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001f800 irq 20 [ 31.030902] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001f808 irq 20 [ 31.077147] usb 1-2: USB disconnect, address 2 [ 31.505118] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 31.517344] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 31.517347] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 31.529341] ata1.00: configured for UDMA/133 [ 31.577142] usbcore: registered new interface driver hiddev [ 31.881099] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 32.005107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.037111] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 32.037114] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 32.037119] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 32.037189] scsi2 : ahci [ 32.037228] ata3: SATA max UDMA/133 cmd 0xffffc20000aa8100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 32.087943] usb 1-2: configuration #1 chosen from 1 choice [ 32.177237] ata2.00: ATAPI: ASUS DRW-1814BLT, 1.13, max UDMA/66 [ 32.353095] ata3: SATA link down (SStatus 0 SControl 300) [ 32.361237] ata2.00: configured for UDMA/66 [ 32.361324] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 32.362119] scsi 1:0:0:0: CD-ROM ASUS DRW-1814BLT 1.13 PQ: 0 ANSI: 5 [ 32.362496] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 32.362499] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 32.362961] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 32.363011] scsi3 : sata_nv [ 32.363071] scsi4 : sata_nv [ 32.363144] ata4: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001f300 irq 23 [ 32.363147] ata5: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001f308 irq 23 [ 32.397094] usb 1-4: new low speed USB device using ohci_hcd and address 4 [ 32.632941] usb 1-4: configuration #1 chosen from 1 choice [ 32.642556] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 [ 32.642575] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2 [ 32.656063] input: USB Keyboard as /class/input/input2 [ 32.656069] input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0b.0-4 [ 32.677088] ata4: SATA link down (SStatus 0 SControl 300) [ 32.688918] input: USB Keyboard as /class/input/input3 [ 32.688924] input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0b.0-4 [ 32.688933] usbcore: registered new interface driver usbhid [ 32.688937] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 33.001081] ata5: SATA link down (SStatus 0 SControl 300) [ 33.013490] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 33.013497] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 33.064611] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 33.064615] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 33.066677] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 33.071750] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 33.071767] NFORCE-MCP51: chipset revision 161 [ 33.071769] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 33.071776] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 33.071781] ide0: BM-DMA at 0xfd00-0xfd07, BIOS settings: hda:DMA, hdb:DMA [ 33.071788] ide1: BM-DMA at 0xfd08-0xfd0f, BIOS settings: hdc:DMA, hdd:DMA [ 33.071793] Probing IDE interface ide0... [ 33.090421] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 33.090432] sd 0:0:0:0: [sda] Write Protect is off [ 33.090434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.090447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.090488] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 33.090495] sd 0:0:0:0: [sda] Write Protect is off [ 33.090497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.090509] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.090514] sda: sda1 sda2 sda3 < sda5 > sda4 [ 33.180563] sd 0:0:0:0: [sda] Attached SCSI disk [ 33.183525] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.183542] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 33.185081] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 33.185084] Uniform CD-ROM driver Revision: 3.20 [ 33.185129] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 33.466542] kjournald starting. Commit interval 5 seconds [ 33.466550] EXT3-fs: mounted filesystem with ordered data mode. [ 33.641070] Probing IDE interface ide1... [ 34.349154] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800016b6116] [ 39.386547] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 39.388183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 39.454470] input: PC Speaker as /class/input/input4 [ 39.463185] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 39.463342] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 39.513484] usbcore: registered new interface driver xpad [ 39.513488] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 39.526911] parport_pc 00:09: reported by Plug and Play ACPI [ 39.526940] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 39.594863] nvidia: module license 'NVIDIA' taints kernel. [ 39.848759] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 39.848763] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 [ 39.848771] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 39.848892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 39.976101] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 39.976106] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 39.976592] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 40.418180] lp0: using parport0 (interrupt-driven). [ 40.491427] video_buf: exports duplicate symbol videobuf_mmap_mapper (owned by videobuf_core) [ 40.510272] videobuf_dvb: disagrees about version of symbol dvb_frontend_detach [ 40.510275] videobuf_dvb: Unknown symbol dvb_frontend_detach [ 40.510319] videobuf_dvb: disagrees about version of symbol dvb_unregister_frontend [ 40.510321] videobuf_dvb: Unknown symbol dvb_unregister_frontend [ 40.510340] videobuf_dvb: disagrees about version of symbol dvb_register_frontend [ 40.510342] videobuf_dvb: Unknown symbol dvb_register_frontend [ 40.526872] Linux video capture interface: v2.00 [ 40.560966] video_buf: exports duplicate symbol videobuf_mmap_mapper (owned by videobuf_core) [ 40.574236] saa7134: disagrees about version of symbol videobuf_streamoff [ 40.574239] saa7134: Unknown symbol videobuf_streamoff [ 40.574295] saa7134: disagrees about version of symbol videobuf_poll_stream [ 40.574297] saa7134: Unknown symbol videobuf_poll_stream [ 40.574338] saa7134: disagrees about version of symbol videobuf_read_stop [ 40.574340] saa7134: Unknown symbol videobuf_read_stop [ 40.574485] saa7134: disagrees about version of symbol videobuf_reqbufs [ 40.574487] saa7134: Unknown symbol videobuf_reqbufs [ 40.574586] saa7134: disagrees about version of symbol videobuf_waiton [ 40.574588] saa7134: Unknown symbol videobuf_waiton [ 40.574680] saa7134: disagrees about version of symbol videobuf_dqbuf [ 40.574682] saa7134: Unknown symbol videobuf_dqbuf [ 40.574839] saa7134: Unknown symbol videobuf_queue_init [ 40.575063] saa7134: disagrees about version of symbol videobuf_dma_unmap [ 40.575065] saa7134: Unknown symbol videobuf_dma_unmap [ 40.575086] saa7134: disagrees about version of symbol videobuf_read_stream [ 40.575088] saa7134: Unknown symbol videobuf_read_stream [ 40.575121] saa7134: disagrees about version of symbol videobuf_querybuf [ 40.575123] saa7134: Unknown symbol videobuf_querybuf [ 40.575195] saa7134: disagrees about version of symbol videobuf_qbuf [ 40.575196] saa7134: Unknown symbol videobuf_qbuf [ 40.575253] saa7134: disagrees about version of symbol videobuf_read_one [ 40.575255] saa7134: Unknown symbol videobuf_read_one [ 40.575436] saa7134: disagrees about version of symbol videobuf_iolock [ 40.575437] saa7134: Unknown symbol videobuf_iolock [ 40.575483] saa7134: disagrees about version of symbol videobuf_streamon [ 40.575485] saa7134: Unknown symbol videobuf_streamon [ 40.575620] saa7134: disagrees about version of symbol videobuf_mmap_mapper [ 40.575622] saa7134: Unknown symbol videobuf_mmap_mapper [ 40.575736] saa7134: disagrees about version of symbol videobuf_mmap_free [ 40.575738] saa7134: Unknown symbol videobuf_mmap_free [ 40.601524] saa7134_dvb: Unknown symbol videobuf_queue_init [ 40.601575] saa7134_dvb: Unknown symbol saa7134_ts_register [ 40.601618] saa7134_dvb: Unknown symbol videobuf_dvb_unregister [ 40.601644] saa7134_dvb: Unknown symbol videobuf_dvb_register [ 40.601678] saa7134_dvb: Unknown symbol saa7134_set_gpio [ 40.601709] saa7134_dvb: Unknown symbol saa7134_ts_qops [ 40.601752] saa7134_dvb: Unknown symbol saa7134_i2c_call_clients [ 40.601828] saa7134_dvb: Unknown symbol saa7134_ts_unregister [ 40.638413] it87: Found IT8718F chip at 0x290, revision 2 [ 40.638424] it87: in3 is VCC (+5V) [ 40.638425] it87: in7 is VCCH (+5V Stand-By) [ 40.653969] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 40.655280] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 41.147952] EXT3 FS on sda5, internal journal [ 45.244345] No dock devices found. [ 45.396858] input: Power Button (FF) as /class/input/input5 [ 45.396886] ACPI: Power Button (FF) [PWRF] [ 45.396928] input: Power Button (CM) as /class/input/input6 [ 45.396941] ACPI: Power Button (CM) [PWRB] [ 46.988807] ppdev: user-space parallel port driver [ 47.223609] audit(1200759175.880:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5283 profile="/usr/sbin/cupsd" [ 49.264596] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 49.264601] vboxdrv: Successfully done. [ 49.633024] /dev/vmmon[5639]: Module vmmon: registered with major=10 minor=165 [ 49.633042] /dev/vmmon[5639]: Module vmmon: initialized [ 49.768839] Failure registering capabilities with primary security module. [ 49.922734] Bluetooth: Core ver 2.11 [ 49.922869] NET: Registered protocol family 31 [ 49.922871] Bluetooth: HCI device and connection manager initialized [ 49.922874] Bluetooth: HCI socket layer initialized [ 49.932340] Bluetooth: L2CAP ver 2.8 [ 49.932345] Bluetooth: L2CAP socket layer initialized [ 49.991888] Bluetooth: RFCOMM socket layer initialized [ 49.991906] Bluetooth: RFCOMM TTY layer initialized [ 49.991908] Bluetooth: RFCOMM ver 1.8 [ 55.008127] NET: Registered protocol family 17 [ 57.434045] NET: Registered protocol family 10 [ 57.434132] lo: Disabled Privacy Extensions [ 68.360370] eth0: no IPv6 routers present [ 115.627440] usb 2-6: new high speed USB device using ehci_hcd and address 4 [ 115.760286] usb 2-6: configuration #1 chosen from 1 choice [ 115.827343] usbcore: registered new interface driver libusual [ 115.847271] Initializing USB Mass Storage driver... [ 115.847526] scsi5 : SCSI emulation for USB Mass Storage devices [ 115.847690] usb-storage: device found at 4 [ 115.847692] usb-storage: waiting for device to settle before scanning [ 115.847949] usbcore: registered new interface driver usb-storage [ 115.848069] USB Mass Storage support registered. [ 120.847547] usb-storage: device scan complete [ 120.849038] scsi 5:0:0:0: Direct-Access FUJIFILM USB-DRIVEUNIT 1.00 PQ: 0 ANSI: 0 CCS [ 120.853026] sd 5:0:0:0: [sdb] 2047815 512-byte hardware sectors (1048 MB) [ 120.855649] sd 5:0:0:0: [sdb] Write Protect is off [ 120.855652] sd 5:0:0:0: [sdb] Mode Sense: 07 00 00 00 [ 120.855654] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 120.859775] sd 5:0:0:0: [sdb] 2047815 512-byte hardware sectors (1048 MB) [ 120.862648] sd 5:0:0:0: [sdb] Write Protect is off [ 120.862650] sd 5:0:0:0: [sdb] Mode Sense: 07 00 00 00 [ 120.862652] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 120.862655] sdb: sdb1 [ 120.865923] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 120.865962] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 224.060958] npviewer.bin[7236]: segfault at 00000000f77f75de rip 00000000f7ad90ed rsp 00000000f5b2ad80 error 7 [ 224.060963] npviewer.bin[7223]: segfault at 0000000065786970 rip 00000000f7af76fe rsp 00000000fffd8970 error 4

Remote Control Support

discuss support for the remote control here

External Links

• UK product page
• Fr product page