TBS QBOX3

From LinuxTVWiki
Revision as of 07:50, 29 November 2011 by Tbs (talk | contribs) (Created page with "===Overview/Features=== thumb|image Qbox3 * USB2.0 Interface * Transponders blind scan (both for DVB-S2 and DVB-S) * Supported by DVBDream, Prog...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

===Overview/Features===

image Qbox3
  • USB2.0 Interface
  • Transponders blind scan (both for DVB-S2 and DVB-S)
  • Supported by DVBDream, ProgDVB, AltDVB, Skynet, Skygrabber,TSreader
  • DiSEqC 2.x compliant

Components Used

  • CX24118(Tuner)
  • TDA 10071(Demod)
  • Cy68103(usb)


Identification

Device Descriptor:

 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0 
 bDeviceProtocol         0 
 bMaxPacketSize0        64
 idVendor           0x734c TBS Technologies China
 idProduct          0x5921 
 bcdDevice            0.01
 iManufacturer           1 
 iProduct                2 
 iSerial                 0 
 bNumConfigurations      1

Configuration Descriptor:

 bLength                 9
 bDescriptorType         2
  wTotalLength           32
  bNumInterfaces          1
  bConfigurationValue     1
  iConfiguration          0 
  bmAttributes         0x80
  (Bus Powered)
  MaxPower                0mA

Interface Descriptor:

  bLength                 9
  bDescriptorType         4
  bInterfaceNumber        0
  bAlternateSetting       0
  bNumEndpoints           2
  bInterfaceClass       255 Vendor Specific Class
  bInterfaceSubClass      0 
  bInterfaceProtocol      0 
  iInterface              0 

Endpoint Descriptor:

   bLength                 7
   bDescriptorType         5
   bEndpointAddress     0x82  EP 2 IN
   bmAttributes            2
   Transfer Type            Bulk
   Synch Type               None
   Usage Type               Data
   wMaxPacketSize     0x0200  1x 512 bytes
   bInterval               1
     

Endpoint Descriptor:

    bLength                 7
    bDescriptorType         5
    bEndpointAddress     0x81  EP 1 IN
    bmAttributes            2
    Transfer Type            Bulk
    Synch Type               None
    Usage Type               Data
    wMaxPacketSize     0x0002  1x 2 bytes
    bInterval               0

Firware

[ 1790.425681] dvb-usb: found a 'TBS QBOXS3 DVBS2 USB2.0' in cold state, will try to load a firmware [ 1790.430457] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5921.fw'

Sample Kernel Output

[ 1790.292114] usb 1-3: new high speed USB device number 12 using ehci_hcd
[ 1790.425681] dvb-usb: found a 'TBS QBOXS3 DVBS2 USB2.0' in cold state, will try to load a firmware
[ 1790.430457] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5921.fw'
[ 1790.435487] tbsqboxs3: start downloading TBSQBOX firmware
[ 1790.556131] dvb-usb: found a 'TBS QBOXS3 DVBS2 USB2.0' in warm state.
[ 1790.556254] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1790.564498] DVB: registering new adapter (TBS QBOXS3 DVBS2 USB2.0)
[ 1790.580713] tbsqboxs3: read eeprom failed
[ 1790.580722] dvb-usb: MAC address reading failed.
[ 1790.605782] TurboSight TBS 5921 Frontend Attaching...
[ 1790.688467] TurboSight TBS 5921 Frontend:
[ 1790.688471]  tbs5921fe - attach failed
[ 1790.688488] dvb-usb: no frontend was attached by 'TBS QBOXS3 DVBS2 USB2.0'
[ 1790.705010] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-3/input/input9
[ 1790.705133] dvb-usb: schedule remote query interval to 150 msecs.
[ 1790.705142] dvb-usb: TBS QBOXS3 DVBS2 USB2.0 successfully initialized and connected.
[ 1790.705219] usb 1-3: USB disconnect, device number 12
[ 1790.720782] dvb-usb: TBS QBOXS3 DVBS2 USB2.0 successfully deinitialized and disconnected.
[ 1792.208132] usb 1-3: new high speed USB device number 13 using ehci_hcd
[ 1792.341239] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 1792.342081] dvb-usb: found a 'TBS QBOXS3 DVBS2 USB2.0' in cold state, will try to load a firmware
[ 1792.348080] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5921.fw'
[ 1792.352462] tbsqboxs3: start downloading TBSQBOX firmware
[ 1792.472163] dvb-usb: found a 'TBS QBOXS3 DVBS2 USB2.0' in warm state.
[ 1792.472285] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1792.472482] DVB: registering new adapter (TBS QBOXS3 DVBS2 USB2.0)
[ 1792.601956] dvb-usb: MAC address: 00:22:ab:c0:17:a8
[ 1792.602616] TurboSight TBS 5921 Frontend Attaching...
[ 1792.656593] QBOXS3: TBS5921FE attached.
[ 1792.656961] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5921 DVBS/S2 frontend)...
[ 1792.657601] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-3/input/input10
[ 1792.657719] dvb-usb: schedule remote query interval to 150 msecs.
[ 1792.657729] dvb-usb: TBS QBOXS3 DVBS2 USB2.0 successfully initialized and connected.
[ 1956.732451] r8169 0000:03:00.0: eth0: link up

External Links