Talk:Realtek RTL2831U: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(Humble request for an aditional ID)
 
 
Line 88: Line 88:


https://usb-ids.gowdy.us/read/UD/1f4d
https://usb-ids.gowdy.us/read/UD/1f4d

----------------------------------------------------------------------------

Hello, I have a possible new stick as well

PEAK Peak 102569AGPK with USB ID 1b80:d395. It shows up as Afatech but has the Realtech chip... :

<pre>
Bus 001 Device 004: ID 1b80:d395 Afatech
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1b80 Afatech
idProduct 0xd395
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
</pre>


The circuit board is stamped HU394-T and has a Realtek RTL2832U chip on it.

Appears to be working for somone under the same source as above:

http://aur.archlinux.org/packages.php?ID=36746&comments=all

Latest revision as of 18:56, 30 January 2011

Possible new ID 1f4d:b803

Greetings, I just recently acquired an USB tuner from the company "NPG" model "Real DVB-T F PLUS" (but the most common vendor/model with this ID is Lifeview LV5TDLX), looking for a suitable driver using the USB ID, I found multiple references pointing to use this driver. Trying the tarballs available from those sources, none of then could compile as I am using a "recent" kernel version (2.6.35). None of the Mercurial branches pointed in the wiki page detects the USB device as the ID is not listed in any of then. Here I paste the information dumped from the device just in case it can be added to the supported device list:

# lsusb
Bus 001 Device 002: ID 1f4d:b803
# lsusb -v -d 1f4d:b803

Bus 001 Device 002: ID 1f4d:b803  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x1f4d 
  idProduct          0xb803 
  bcdDevice            1.00
  iManufacturer           1 Realtek
  iProduct                2 RTL2838UHIDIR
  iSerial                 3 00000001
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          4 USB2.0-Bulk&Iso
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 Bulk-In, Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 Bulk-In, Interface
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      2
Device Status:     0x0000
  (Bus Powered)

I have not melded with the IDs myself just in case I brick the stick, but if you thinks it is safe, I can replace the ids of one of the supported sticks and tell you about the results. Sources:

http://www.turnovfree.net/~stybla/linux/v4l-dvb/lv5tdlx/readme.lv5tdlx.txt

http://aur.archlinux.org/packages.php?ID=36746&comments=all

http://www.spinics.net/lists/linux-media/msg23229.html

http://www.abclinuxu.cz/poradna/hardware/show/302823

https://usb-ids.gowdy.us/read/UD/1f4d


Hello, I have a possible new stick as well

PEAK Peak 102569AGPK with USB ID 1b80:d395. It shows up as Afatech but has the Realtech chip... :

Bus 001 Device 004: ID 1b80:d395 Afatech 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x1b80 Afatech
  idProduct          0xd395 
  bcdDevice            1.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)


The circuit board is stamped HU394-T and has a Realtek RTL2832U chip on it.

Appears to be working for somone under the same source as above:

http://aur.archlinux.org/packages.php?ID=36746&comments=all