Difference between revisions of "Talk:TeVii S660"

From LinuxTVWiki
Jump to navigation Jump to search
(TERRATEC Cinergy S2 USB HD is similar.)
 
Line 2: Line 2:
   
 
Kernel messages:
 
Kernel messages:
[367377.432062] usb 1-2: new high speed USB device using ehci_hcd and address 26
+
<nowiki>[367377.432062] usb 1-2: new high speed USB device using ehci_hcd and address 26
 
[367377.565614] usb 1-2: New USB device found, idVendor=0ccd, idProduct=00a8
 
[367377.565614] usb 1-2: New USB device found, idVendor=0ccd, idProduct=00a8
 
[367377.565645] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber= 3
 
[367377.565645] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber= 3
Line 33: Line 33:
 
[367378.458956] dvb-usb: Terratec Cinergy S2 USB HD successfully initialized and connected.
 
[367378.458956] dvb-usb: Terratec Cinergy S2 USB HD successfully initialized and connected.
 
[367378.459020] usbcore: registered new interface driver dw2102
 
[367378.459020] usbcore: registered new interface driver dw2102
  +
</nowiki>
 
 
Linux drivers can be downloaded from the TERRATEC website (or simply use the liplianin repository).
 
Linux drivers can be downloaded from the TERRATEC website (or simply use the liplianin repository).

Revision as of 19:50, 4 January 2011

I own a TERRATEC Cinergy S2 USB HD and this device appears to be the same as the TeVii S660. It has the same form factor, connectors are in the same location and it uses the ds3000 and dvb_usb_dw2102 modules.

Kernel messages: [367377.432062] usb 1-2: new high speed USB device using ehci_hcd and address 26 [367377.565614] usb 1-2: New USB device found, idVendor=0ccd, idProduct=00a8 [367377.565645] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber= 3 [367377.565678] usb 1-2: Product: USB Stick [367377.565696] usb 1-2: Manufacturer: Max [367377.565712] usb 1-2: SerialNumber: 080116 [367377.566124] usb 1-2: configuration #1 chosen from 1 choice [367378.329403] dw2102: su3000_identify_state [367378.329405] [367378.329441] dvb-usb: found a 'Terratec Cinergy S2 USB HD' in warm state. [367378.329477] dw2102: su3000_power_ctrl: 1, initialized 0 [367378.329479] [367378.331518] dvb-usb: will pass the complete MPEG2 transport stream to the so ftware demuxer. [367378.337400] DVB: registering new adapter (Terratec Cinergy S2 USB HD) [367378.338147] ff 00 00 00 00 00 [367378.338919] ff ff 00 00 00 00 [367378.340628] ff ff ff 00 00 00 [367378.341395] ff ff ff ff 00 00 [367378.342147] ff ff ff ff ff 00 [367378.342897] ff ff ff ff ff ff [367378.342930] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff [367378.457392] DS3000 chip version: 0.192 attached. [367378.457420] dw2102: Attached DS3000! [367378.457421] [367378.457458] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000 /TS2020)... [367378.458675] input: IR-receiver inside an USB DVB receiver as /devices/pci000 0:00/0000:00:10.3/usb1/1-2/input/input32 [367378.458898] dvb-usb: schedule remote query interval to 150 msecs. [367378.458924] dw2102: su3000_power_ctrl: 0, initialized 1 [367378.458925] [367378.458956] dvb-usb: Terratec Cinergy S2 USB HD successfully initialized and connected. [367378.459020] usbcore: registered new interface driver dw2102 Linux drivers can be downloaded from the TERRATEC website (or simply use the liplianin repository).