Difference between revisions of "TechniSat Air2PC-ATSC-USB"

From LinuxTVWiki
Jump to navigation Jump to search
(New page: There are actually two different ATSC USB boxes that were produced by TechniSat that bear the identical name Air2PC-ATSC-USB. Both Air2PC models are supported...)
 
m (added device info from ATSC USB devices)
Line 8: Line 8:
   
 
==Air2PC-ATSC-USB (1st rev)==
 
==Air2PC-ATSC-USB (1st rev)==
  +
{{DvbDeviceList
The original Air2PC model used the B2C2 FlexCop2 or FlexCop2b PCI interface chipset with a Broadcom 3510 demodulator.
 
  +
| content=
  +
{{DvbDevice
  +
| device=TechniSat/B2C2 Air2PC-ATSC-USB
  +
| type=USB1.1
  +
| fw=dvb-fe-bcm3510-01.fw
  +
| hw=[[BCM3510|Broadcom BCM3510]]
  +
| pic=[http://www.bbti.us/products_air2pc_atsc_usb.htm]
  +
}}
  +
}}
  +
  +
The original Air2PC model used the B2C2 FlexCop2 or FlexCop2b PCI interface chipset with a [[Broadcom BCM3510]] [[demodulator]].
  +
  +
The following drivers are needed for this device:
  +
- bcm3510.ko
  +
- b2c2-flexcop.ko
  +
- b2c2-flexcop-usb.ko
   
 
====Firmware====
 
====Firmware====
Line 16: Line 32:
   
 
==Air2PC-ATSC-USB (2nd rev)==
 
==Air2PC-ATSC-USB (2nd rev)==
  +
{{DvbDeviceList
The later revision/variant of the Air2PC card also used the B2C2 FlexCop2 or FlexCop2b PCI interface chipset, but was updated with a Samsung TBMV30111IN NIM that featured a Nxt2002 demodulator.
 
  +
| content=
  +
{{DvbDevice
  +
| device=TechniSat/B2C2 Air2PC-ATSC-USB
  +
| type=USB1.1
  +
| fw=dvb-fe-nxt2002.fw
  +
| hw=[[NxtWave Nxt2002]]
  +
| pic=[http://www.bbti.us/products_air2pc_atsc_usb.htm]
  +
}}
  +
}}
  +
  +
The later revision/variant of the Air2PC card also used the B2C2 FlexCop2 or FlexCop2b PCI interface chipset, but was updated with a Samsung TBMV30111IN NIM that featured a [[NxtWave Nxt2002]] [[demodulator]].
  +
  +
The following drivers are needed for this device:
  +
- nxt2002.ko
  +
- b2c2-flexcop.ko
  +
- b2c2-flexcop-usb.ko
   
 
====Firmware====
 
====Firmware====

Revision as of 01:54, 15 August 2007

There are actually two different ATSC USB boxes that were produced by TechniSat that bear the identical name Air2PC-ATSC-USB. Both Air2PC models are supported under Linux. These are older devices that are no longer manufactured, and have been superseded by the presently offered AirStar-HD5000-USB model.

The origianl "Air2PC ATSC USB" reference design was created by B2C2 and adopted by TechniSat for manufacturing. TechniSat never listed these Air2PC USB boxes on their own website's product pages. Rather, one finds information about these ATSC devices on the BBTI website (TechniSat's source for North American sales and distribution). Evidently, instead of marketing the cards using TechinSat's "*Stars" product lineup nomenclature, BBTI elected to use the orignial B2C2 naming scheme.


Instead of an A/V decoder, they utilize the B2C2 FlexCop IC for a bridge to the USB bus. The FlexCop PCI interface chipset completely lacks any analog input functionality, and this explains why these cards are barren of analog inputs.


Air2PC-ATSC-USB (1st rev)

Device / Model Type Hardware Firmware URL / Pictures
Comments & quirks
TechniSat/B2C2 Air2PC-ATSC-USB USB1.1 Broadcom BCM3510 dvb-fe-bcm3510-01.fw [1]


The original Air2PC model used the B2C2 FlexCop2 or FlexCop2b PCI interface chipset with a Broadcom BCM3510 demodulator.

The following drivers are needed for this device:

 - bcm3510.ko
 - b2c2-flexcop.ko
 - b2c2-flexcop-usb.ko

Firmware

This card requires a firmware file (dvb-fe-bcm3510-01.fw) for the demodulator, which can be obtained from the LinuxTV downloads section. Once the download is complete, place a copy of the firmware file in your /lib/firmware directory. (This directory may differ with some distros; consult your distro's documentation for the appropriate location).


Air2PC-ATSC-USB (2nd rev)

Device / Model Type Hardware Firmware URL / Pictures
Comments & quirks
TechniSat/B2C2 Air2PC-ATSC-USB USB1.1 NxtWave Nxt2002 dvb-fe-nxt2002.fw [2]


The later revision/variant of the Air2PC card also used the B2C2 FlexCop2 or FlexCop2b PCI interface chipset, but was updated with a Samsung TBMV30111IN NIM that featured a NxtWave Nxt2002 demodulator.

The following drivers are needed for this device:

 - nxt2002.ko
 - b2c2-flexcop.ko
 - b2c2-flexcop-usb.ko

Firmware

This card requires a firmware file (dvb-fe-nxt2002.fw) for the demodulator, which can be obtained using the get_dvb_firmware perl script included in the kernel sources:

# cd /[kernel source directory]/Documentation/dvb/
# perl get_dvb_firmware nxt2002

Once the download is complete, place a copy of the firmware file in your /lib/firmware directory. (This directory may differ with some distros; consult your distro's documentation for the appropriate location).


External Links