Difference between revisions of "TechniSat SkyStar S2"

From LinuxTVWiki
Jump to: navigation, search
(Drivers)
(Drivers)
Line 16: Line 16:
 
No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz
 
No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz
   
  +
[Update 2014/04/22]
[Update 2014/04/22] With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed.
 
  +
With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed.
 
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[http://www.vdr-portal.de/index.php?page=Thread&postID=1163233#post1163233]])
 
The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[http://www.vdr-portal.de/index.php?page=Thread&postID=1163233#post1163233]])
   

Revision as of 09:32, 22 April 2014

TechniSat SkyStar S2 Card

A FTA PCI DVB-S2 card from TechniSat.

Components Used

  • PCI Bridge: FlexCop II B
  • Demodulator: CX24120-13Z
  • Tuner: CX24118A
  • LNB: ISL6421

Drivers

There is a patch for the s2-liplianin driver that adds support for the SkyStar S2. Instructions (german) can be found here: http://vdr-portal.de/board/thread.php?threadid=97096#post951944

The patch can be extracted from the file and applied directly to the mainline linux source. Works pretty well then.

No support for 8PSK 3/4. To support the need to replace the crystal oscillator of 45 MHz to 66,667 MHz

[Update 2014/04/22] With the latest patch / driver everything is working fine. Also for 8PSK 3/4 no hardware upgrade is needed. The driver from Custler with latest adaption for 3.10 - 3.13 by Ducky ([[1]])

External Links