TechnoTrend TT-budget S-1500: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 48: Line 48:
|-
|-
| Official Canal Digitaal/TV Vlaanderen Mediaguard module || Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) || N/A || Kaffeine 0.8.3 || Working with corruption
| Official Canal Digitaal/TV Vlaanderen Mediaguard module || Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) || N/A || Kaffeine 0.8.3 || Working with corruption
|-
| Official Canal Digitaal/TV Vlaanderen Mediaguard module, TV Vlaanderen smartcard || Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) || N/A || MythTV 0.21 || Working perfectly, also with simultanious recordings
|-
|-
| Matrix Reborn || ? || N/A || Kaffeine 0.8.3 || Working
| Matrix Reborn || ? || N/A || Kaffeine 0.8.3 || Working

Revision as of 08:38, 7 April 2008

A, so called, Budget or software decoding DVB-S PCI card from TechnoTrend.

Overview

 Card is capable of delivering the full unmodified TS stream to userspace.
 Card can be equipped with a Common Interface for decryption CAMs
 card driver: budget-ci
 interface: PCI
 PCI device id: 1131:7146
 PCI subsystem id: 13c2:1017
 Bridge: Philips SAA7146A
 frontend possibility 1:
   tin box: ALPS BSBE1
   frontend driver: stv0299
   demodulator location: tin box
   demodulator: ?
   PLL: ?
 Notes:
 (BSBE1-502A/SAA7146AH/LNBP21PD)

Images

CAM tests

Using a CAM requires the optional CI extension provided by TechnoTrend.

Feel free to update this table with other types of CAMs.

CAM tests on TechnoTrend S-1500 budget card with CI v 1.0
Type HW version Viaccess version Application version Results
Aston Pro ViAccess ? All ? Working
Aston Pro Irdeto ? ? ? Working, able to decrypt 12 channels simultaneously
Conax 4.xx N/A ? Working
Matrix Reloaded ? N/A ? Working
Cryptoworks ? N/A ? Working
Astoncrypt seca2 1.05 N/A Kaffeine 0.8.3 Working
Official Canal Digitaal/TV Vlaanderen Mediaguard module Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) N/A Kaffeine 0.8.3 Working with corruption
Official Canal Digitaal/TV Vlaanderen Mediaguard module, TV Vlaanderen smartcard Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) N/A MythTV 0.21 Working perfectly, also with simultanious recordings
Matrix Reborn ? N/A Kaffeine 0.8.3 Working
Xcam (X-cam) Angel chip N/A Kaffeine 0.8.3 Working


CAM tests on TechnoTrend S-1500 budget card with CI v 1.1
Type HW version Application version Results
Astoncrypt seca2 1.05 Kaffeine 0.8.3 Working
Xcam (X-cam) Angel chip Kaffeine 0.8.3 Working
Matrix Reborn ? Kaffeine 0.8.3 Working
Official Canal Digitaal/TV Vlaanderen Mediaguard module Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) Kaffeine 0.8.3 Working with corruption
Conax 4.xx gnutv Working
Irdeto Access - CI-module CIM: 49.2.43 CIM SW: IRDETO ACCESS 1.11.003 SoftCell: Ver 2.21A - Demux (SW CA). Compiled Jan 17 2003 14:42:17 gnutv Not working. See below, will work with patch.

CAMs confirmed working after applying any one of this patch (not tried both at the same time, but that seems unnessesary):

http://www.linuxtv.org/pipermail/linux-dvb/2007-July/019116.html

Notes: the corruption on the official CDS/TVV module is so bad you can't seriously watch a program with it, but it could be used to update/activate the smartcard.
CAM tests on TechnoTrend S-1500 budget card with CI v 1.1, using patch mentioned above
Type HW version Application version Results
Irdeto Access - CI-module Produced by SCM. rev. 1.0 and 1.1 gnutv Cammenu works. Decoding ShowTime Arabia fails. Unknown if cam is supposed to work with ShowTime.
Irdeto Access - CI-module Produced by SMIT. gnutv, test-app (en50221 test app) gnutv fails. CAM demands that display_control_callback is connected.
Conax 4.xx N/A ? Working for 1.0W Canal Digital
CAM tests on TechnoTrend S-1500 budget card with unknown CI
Type HW version Application version Results
PowerCAM.Pro ? Kaffeine 0.8.3 Working

External Links