TechnoTrend TT-budget S2-3200

DEVELOPING TechnoTrend TT 3200 DVB-S2


Any news on the development of drivers for the TT 3200 DVB-S2 drivers?
Do the http://jusst.de/manu/stb0899-v4l-dvb.tar.bz2 drivers work?

Has anyone get the TT 3200 DVB-S2 make work ?


Magnus wrote :


 i have a TT-3200 card and trying to get it work in Linux
With some search around I found that Manu has a stb0899
drivers that should do the job. I suceeded to compiled it and are
able to load the drivers (and it found the card).
But when running scan it found nothing, and are throw alot of errors in dmesg (se below).
Im are running 2.6.16.13 and stb0899-c5

dmesg
....
stb0899_write_regs [0xf1c2]: 20
stb0899_write_regs: Reg=[0xf1c2], Data=[0x20 ...], Count=1, Status=-121
stb0899_write_regs [0xf1c3]: 00
stb0899_write_regs: Reg=[0xf1c3], Data=[0x00 ...], Count=1, Status=-121
stb0899_write_regs [0xf200]: 00
stb0899_read_reg: Read error, Reg=[0xf2ff], Status=-121
stb0899_write_regs: Reg=[0xf200], Data=[0x00 ...], Count=1, Status=-121
stb0899_write_regs [0xf201]: 0a
stb0899_read_reg: Read error, Reg=[0xf2ff], Status=-121
stb0899_write_regs: Reg=[0xf201], Data=[0x0a ...], Count=1, Status=-121
stb0899_init: init S2 demod
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf300], Data=[0x00000103]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf300], Data=[0x00000103], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf304], Data=[0x3ed1da56]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf304], Data=[0x3ed1da56], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf308], Data=[0x00004000]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf308], Data=[0x00004000], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf30c], Data=[0x00002ade]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf30c], Data=[0x00002ade], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf310], Data=[0x000001bc]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf310], Data=[0x000001bc], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf314], Data=[0x00000200]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf314], Data=[0x00000200], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf31c], Data=[0x0000000f]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf31c], Data=[0x0000000f], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf320], Data=[0x03fb4a20]
stb0899_write_s2reg ERR (1), Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf320], Data=[0x03fb4a20], status=-121
stb0899_write_s2reg Device=[0xf3fc], Base Address=[0x00000000], Offset=[0xf324], Data=[0x00200c97

Kevpatts: Have you tried using the drivers found here: http://jusst.de/manu/stb0899-v4l-dvb.tar.bz2 instead of the c5 ones? I'm going to be trying the scan tonight with these drivers and will let you know how it goes. kevpatts

Comtech Technology - DVBS2-6899
A little contribution. I've found some information on the net from Comtech Technology. They are the supplier of a modulator that has both the stb0899 and stb6100 in it. The same chips as used in TT3200. Interestingly they published some information on the registers and timing info.
The link: http://comtech.myweb.hinet.net/pdf/dvbs2-6899.pdf