TechnoTrend TT-connect S2-3600
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders.
Upon connection to the USB port, the devices' LED is orange and turns green upon module load.
The USB receiver comes with a black RC5 remote control. IR events can be read from /dev/input/eventX
- Cypress CY7C68013A (FX2LP) (USB 2.0 bridge)
- STMicroelectronics STB0899 multistandard demodulator (DVB-S and DVB-S2).
- STMicroelectronics STB6100 8PSK/QPSK direct conversion (zero IF) tuner for DVB-S2.
- STMicroelectronics LNBP21 LNB supply and control IC.
Vendor ID: 0B48
Product ID: 3007
Making it work
The device does not need any special firmware.
It is still possible to upload a new firmware to the device, although this is not implemented.
Device driver support can be found in this S2API repository 
Sample kernel output
usb 1-2.3: new high speed USB device using ps3-ehci-driver and address 10 usb 1-2.3: configuration #1 chosen from 1 choice dvb-usb: found a ‘Technotrend TT Connect S2-3600′ in warm state. pctv452e_power_ctrl: 1 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Technotrend TT Connect S2-3600) pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. dvb-usb: MAC address: 00:d0:5c:64:75:3c pctv452e_frontend_attach Enter stb0899_attach: Attaching STB0899 pctv452e_frontend_attach Leave Ok DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)… pctv452e_tuner_attach Enter stb6100_attach: Attaching STB6100 pctv452e_tuner_attach Leave input: IR-receiver inside an USB DVB receiver as /class/input/input4 dvb-usb: schedule remote query interval to 500 msecs. pctv452e_power_ctrl: 0 dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected. usbcore: registered new interface driver pctv452e usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
Remote control support
The black TT remote is supported by the device.