TechnoTrend TT-connect S2-4600: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 2: Line 2:


==Overview/Features==
==Overview/Features==
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders. It comes with a 12V 1.5A power adapter. Open source drivers are being added into the kernel [https://www.mail-archive.com/linux-media@vger.kernel.org/msg86438.html] and media_build.
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 transponders. It comes with a 12V 1.5A power adapter. Open source drivers are being added into the kernel [https://www.mail-archive.com/linux-media@vger.kernel.org/msg86438.html] and media_build.


This card works in conjuction with Liplianin drivers.
This card also works in with the Liplianin drivers, which are a bit outdated by now though.


Alternatively with Ubuntu 13.10 64b and a kernel >= 3.11, you can use https://github.com/kenzodeluxe/s2-4600/archive/master.zip following the installation instructions from http://www.linuxtv.org/wiki/index.php/DVBSKy (in case Liplianin doesn't compile for you either).
Alternatively with Ubuntu 13.10 64b and a kernel >= 3.11, you can use https://github.com/kenzodeluxe/s2-4600/archive/master.zip following the installation instructions from http://www.linuxtv.org/wiki/index.php/DVBSky (in case Liplianin doesn't compile for you either).


==Components used==
==Components used==

Revision as of 10:32, 17 March 2015

A DVB-S2 USB 2.0 Device from TechnoTrend.

Overview/Features

This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 transponders. It comes with a 12V 1.5A power adapter. Open source drivers are being added into the kernel [1] and media_build.

This card also works in with the Liplianin drivers, which are a bit outdated by now though.

Alternatively with Ubuntu 13.10 64b and a kernel >= 3.11, you can use https://github.com/kenzodeluxe/s2-4600/archive/master.zip following the installation instructions from http://www.linuxtv.org/wiki/index.php/DVBSky (in case Liplianin doesn't compile for you either).

Components used

Identification

Vendor ID: 0B48
Product ID: 3011

/home/pi# lsusb
Bus 001 Device 005: ID 0b48:3011 TechnoTrend AG 

Firmware

When using the open source drivers, the firmware for M88DS3103 is needed: dvb-demod-m88ds3103.fw. Available here.

When using the Liplianin drivers, needs dvb-fe-ds3103.fw.

Identification

Open source drivers

[72834.982925] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state.
[72834.983157] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[72834.983358] DVB: registering new adapter (TechnoTrend TT-connect S2-4600)
[72834.983450] usb 2-2: media controller created
[72834.987975] dvb-usb: MAC address: bc:ea:2b:46:12:92
[72834.988287] dvb_register_media_device: media device 'dvb-demux' registered.
[72834.988418] dvb_register_media_device: media device 'dvb-dvr' registered.
[72834.988590] dvb_register_media_device: media device 'dvb-net' registered.
[72835.297899] i2c i2c-0: Added multiplexed i2c bus 1
[72835.378739] m88ts2022 1-0060: Montage M88TS2022 successfully identified
[72835.378753] usb 2-2: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)...
[72835.378886] dvb_register_media_device: media device 'Montage M88DS3103' registered.
[72835.379237] Registered IR keymap rc-tt-1500
[72835.379376] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0/input9
[72835.379505] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0
[72835.379508] dvb-usb: schedule remote query interval to 250 msecs.
[72835.379514] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected.
[72835.379551] usbcore: registered new interface driver dw2102
[72973.534136] i2c i2c-0: m88ds3103: found a 'Montage M88DS3103' in cold state
[72973.534169] i2c i2c-0: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[72974.592456] i2c i2c-0: m88ds3103: found a 'Montage M88DS3103' in warm state
[72974.592461] i2c i2c-0: m88ds3103: firmware version 3.B

Liplianin

dvb-usb: found a 'TT Connect S2 4600' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TT Connect S2 4600)
dvb-usb: MAC address: 00:00:00:00:00:00
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3103.fw)...
usb 1-4.3: DVB: registering adapter 0 frontend 0 (Montage Technology DS3103/TS2022)...
dvb-usb: TT Connect S2 4600 successfully initialized and connected

(Some output snipped).

External links