Temporary USB Device Holding page: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(removed the info related to the two TechniSat ATSC USB models to the ATSC USB Device article)
Line 87: Line 87:
}}
}}


=== [[TechniSat]]/[[B2C2]] Sky/Air/Cable2PC USB ([[Flexcop]]-based) (DVB-S/T/C & ATSC) ===
=== [[TechniSat]]/[[B2C2]] Sky/Air/Cable2PC USB ([[Flexcop]]-based) (DVB-S/T/C) ===


Most devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
Most devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:

Revision as of 16:33, 10 August 2007

Info from the old DVB USB page. DO NOT ADD TO THIS PAGE! The info is to be removed and added to the appropriate sections.

TechnoTrend Budget USB1.1 (DVB-S/T/C)

All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:

 - stv0299.ko
 - cx22700.ko
 - tda1004x.ko
 - tda8083.ko
 - ves1820.ko
 - dvb-ttusb-budget.ko

These frontend(s)/demodulator(s) can be found in various revisions of this device:

 - STMicroelectronics STV0299
 - Conexant CX22700
 - Philips TDA10046
 - Philips TDA8083
 - VLSI VES1820
Device / Model Type Hardware Firmware URL / Pictures
Comments & quirks
Hauppauge WinTV-NOVA-S USB USB1.1 [1]
Hauppauge WinTV-NOVA-T USB USB1.1 Philips TDA10046 dvb-fe-tda10046.fw [2]
Satelco USB-Box DVB-S/T/C USB1.1 Philips TDA10046 dvb-fe-tda10046.fw [3]
TechnoTrend TT-PCline USB family DVB-S/T/C USB1.1 Philips TDA10046 dvb-fe-tda10046.fw [4]


TechnoTrend DEC Budget USB1.1 (DVB-S/T)

All devices below (except the DEC1100-T) are supported by the LinuxTV driver. The following drivers are needed for these devices:

 - ttusbdecfe.ko
 - ttusb_dec.ko

The DECs are set-top boxes equipped with a USB port and can be used without a PC. The TV-Out can't be used for PC output.

Device / Model Type Hardware Firmware URL / Pictures
Comments & quirks
Hauppauge DEC3000-S USB (DVB-S) USB1.1 DEC-specific dvb-ttusb-dec-3000s.fw [5]
Hauppauge DEC2000-T USB (DVB-T) USB1.1 DEC-specific dvb-ttusb-dec-2000t.fw [6]
Hauppauge DEC1100-T (DVB-T) USB1.1 DEC-specific [7]
TV set-top box only - no PC output
Hauppauge DEC2540-T USB (DVB-T) USB1.1 DEC-specific
Similar to DEC2000-T but with Conax(?) decrypt card slot. Decryption is not supported under GNU/Linux. Only sold in the Netherlands.


TechniSat/B2C2 Sky/Air/Cable2PC USB (Flexcop-based) (DVB-S/T/C)

Most devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:

 - stv0299.ko
 - stv0297.ko
 - mt352.ko
 - mt312.ko
 - b2c2-flexcop.ko
 - b2c2-flexcop-usb.ko

These frontend(s)/demodulator(s) can be found in various revisions of this device:

 - STMicroelectronics STV0299
 - STMicroelectronics STV0297
 - Zarlink MT312
 - Zarlink MT352


Device / Model Type Hardware Firmware URL / Pictures
Comments & quirks
TechniSat/B2C2 SkyStar USB USB1.1 [8]
TechniSat/B2C2 SkyStar USB Plus USB2.0 [9]
TechniSat/B2C2 AirStar USB DVB-T USB1.1 [10]
Not supported?

W3ird_N3rd says that "it is detected perfectly but it is not capable of locking onto any channel, 0 channels are found. My antenna is fine and the device does work on Windows, so somehow support for this device is broken. Don't buy it till it's fixed."

TechniSat/B2C2 CableStar USB USB1.1
Discontinued