TerraTec Cinergy Hybrid T USB XS

From LinuxTVWiki
Revision as of 13:52, 29 June 2009 by Devin.heitmueller (talk | contribs) (djh - add note about pending PULL request for zl10353 version of the device for the mainline)
Jump to navigation Jump to search

TerraTec Cinergy Hybrid T USB XS is a USB 2.0 DVB-T device.

There are apparently several slightly different versions of the Cinergy Hybrid T USB XS.

Currently not supported in the Linux kernel. Experimental support exists, provided by the third-party out-of-kernel project here.

Also, a PULL request has been issued providing support for the zl10353 variant of the device. Until that is merged into the v4l-dvb mainline, it can be found here

Based on:

  • Empiatech Em2880 usb bridge
  • Xceive XC3028 tuner and analog IF demodulator
  • Zarlink DVB-T demodulator (ZL10353 or MT352, depending upon version)


Photographs and other info about version 0ccd:005e

The version with usb identifier 0ccd:005e (aka the "PAL-BG/Germany new version TT") seems to feature the Zarlink 10353 DVB-T demodulator (it has the WJCE6353).

Printed on both the PCBs, near the USB connector:
AD803053T-A3
Bottom v.1.1

On the bigger integrated on the middle:
WJCE6353
W620AA46
(M)(C)'05 (e3)
(This seems a chip from intel for DVB-T demodulation http://intel.industrialpartner.com/semiconductors/wjce6353.htm)

The little chip with the yellow spot (first part of the 3rd line is partially unreadable):
ATMEL640
24C02BN
?U18

The even smaller chip near the USB connector:
PI3C3
306LE

dmesg output

This is the dmesg output plugging the USB device, taken with the 2.4.27 kernel from ArchLinux x86_64.

- usb 2-4: new high speed USB device using ehci_hcd and address 5
- usb 2-4: configuration #1 chosen from 1 choice
- em28xx new video device (0ccd:005e): interface 0, class 255
- em28xx Doesn't have usb audio class
- em28xx #0: Alternate settings: 8
- em28xx #0: Alternate setting 0, max size= 0
- em28xx #0: Alternate setting 1, max size= 0
- em28xx #0: Alternate setting 2, max size= 1448
- em28xx #0: Alternate setting 3, max size= 2048
- em28xx #0: Alternate setting 4, max size= 2304
- em28xx #0: Alternate setting 5, max size= 2580
- em28xx #0: Alternate setting 6, max size= 2892
- em28xx #0: Alternate setting 7, max size= 3072
- em28xx #0: chip ID is em2882/em2883
- tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
- em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
- em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
- em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
- em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
- em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
- em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
- em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
- em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
- em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
- em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
- em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
- em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
- em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00
- em28xx #0: i2c eeprom f0: 38 00 30 00 38 00 33 00 00 00 00 00 00 00 00 00
- EEPROM ID= 0x9567eb1a, hash = 0x4c13bfbe
- Vendor/Product ID= 0ccd:005e
- AC97 audio (5 sample rates)
- 500mA max power
- Table at 0x27, strings=0x409e, 0x1cde, 0x346a
- em28xx #0: 
- 
- em28xx #0: The support for this board weren't valid yet.
- em28xx #0: Please send a report of having this working
- em28xx #0: not to V4L mailing list (and/or to other addresses)
- 
- xc2028 2-0061: creating new instance
- xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
- firmware: requesting xc3028-v27.fw
- xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
- xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
- xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
- SCODE (20000000), id 000000000000b700:
- xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
- xc2028 2-0061: i2c input error: rc = -19 (should be 2)
- xc2028 2-0061: Unable to read tuner registers.
- xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
- xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
- SCODE (20000000), id 000000000000b700:
- xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
- xc2028 2-0061: i2c input error: rc = -19 (should be 2)
- xc2028 2-0061: Unable to read tuner registers.
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- tvp5150 2-005c: *** unknown tvp8081 chip detected.
- tvp5150 2-005c: *** Rom ver is 130.131
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
- em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
- em28xx-audio.c: probing for em28x1 non standard usbaudio
- em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
- em28xx #0: Found Terratec Hybrid XS (em2882)
- tvp5150 2-005c: tvp5150am1 detected.

Currently, /dev/video0 and /dev/vbo0 are created. No frontends are registered (missing /dev/dvb/*) and no software seems to recognized the DVB device.

External links