TerraTec Cinergy T USB RC

From LinuxTVWiki
Revision as of 17:36, 5 January 2011 by Wirbel (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Vendor
Device/Model
Supported ID on
Interface
Hardware Firmware Comment / Pictures URL E
TerraTec Cinergy T USB RC (mk II) Yes, in kernel since 2.6.37 0ccd:0097 USB2.0 Afatech AF9015A + TDA18218HN + EM24C02A dvb-usb-af9015.fw Dvb-t-usb-terratec-cinergy-T-RC-mk2-001.jpg [1] Jump to the place where you can edit this entry

Version 2 AF9015

USB ID: 0ccd:0097 Manufacturer: NEWMI

Uses tuner NXP TDA18218 and AF9015A. Use Kernel-2.6.37 or v4l-dvb git.

After loading dvb-usb-af9015 you should see the following:

usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1