TwinHan 3506 Hybrid: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (Added card details and link)
m (Added category:DVB-T PCI Cards)
 
Line 38: Line 38:
==External Links==
==External Links==
[http://www.twinhan.com/product_D%2BA_3056_1.asp TwinHan 3506 Hybrid Product Page]
[http://www.twinhan.com/product_D%2BA_3056_1.asp TwinHan 3506 Hybrid Product Page]
[[Category:DVB-T PCI Cards]]

Latest revision as of 22:12, 11 May 2009

A Hybrid Analog/DVB-T PCI card from TwinHan

Overview/Features

  • PCI Interface
  • Inputs: Analog antenna, Digital antenna, S-Video, remote control

Making it Work

Firmware

This card requires a firmware file (dvb-fe-tda10046.fw) for the DVB-T demodulator.

Drivers

If this card isn't detected properly, use:

   rmmod saa7134
   modprobe saa7134 card=109

If when you try and tune this card, you get i2c gate error, then you need to get the source code and compile (see How to Obtain, Build and Install V4L-DVB Device Drivers) with the following changes:

open saa7134-dvb.c and locate the following:

   static struct tda1004x_config philips_tiger_s_config = { 
       .demod_address = 0x08,
       .invert        = 1,
       .invert_oclk   = 0,
       .xtal_freq     = TDA10046_XTAL_16M,
       .agc_config    = TDA10046_AGC_TDA827X,
       .gpio_config   = TDA10046_GP01_I,
       .if_freq       = TDA10046_FREQ_045,
       .i2c_gate      = 0x4b,
       .tuner_address = 0x61,
       .tuner_config  = 2,
       .antenna_switch= 1,
       .request_firmware = philips_tda1004x_request_firmware
   };
 

Then change:

       .i2c_gate from 0x4b to 0x42

and recompile.

External Links

TwinHan 3506 Hybrid Product Page