TwinHan 3506 Hybrid

If this card isn't detected properly, use:

   rmmod saa7134
   modprobe saa7134 card=109

If when you try and tune this card, you get i2c gate error, then you need to get the source code and compile with the following changes:

open saa7134-dvb.c and locate the following:

   static struct tda1004x_config philips_tiger_s_config = { 
       .demod_address = 0x08,
       .invert        = 1,
       .invert_oclk   = 0,
       .xtal_freq     = TDA10046_XTAL_16M,
       .agc_config    = TDA10046_AGC_TDA827X,
       .gpio_config   = TDA10046_GP01_I,
       .if_freq       = TDA10046_FREQ_045,
       .i2c_gate      = 0x4b,
       .tuner_address = 0x61,
       .tuner_config  = 2,
       .antenna_switch= 1,
       .request_firmware = philips_tda1004x_request_firmware
   };
 

Then change:

       .i2c_gate from 0x4b to 0x42

and recompile.