TwinHan 3506 Hybrid: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
modprobe saa7134 card=109 |
modprobe saa7134 card=109 |
||
If when you try and tune this card, you get i2c gate error, then you need to get the source code and compile with the following changes: |
If when you try and tune this card, you get i2c gate error, then you need to get the source code and compile (see [[How_to_install_DVB_device_drivers]]) with the following changes: |
||
open saa7134-dvb.c and locate the following: |
open saa7134-dvb.c and locate the following: |
Revision as of 11:25, 7 June 2007
If this card isn't detected properly, use:
rmmod saa7134 modprobe saa7134 card=109
If when you try and tune this card, you get i2c gate error, then you need to get the source code and compile (see How_to_install_DVB_device_drivers) with the following changes:
open saa7134-dvb.c and locate the following:
static struct tda1004x_config philips_tiger_s_config = { .demod_address = 0x08, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, .agc_config = TDA10046_AGC_TDA827X, .gpio_config = TDA10046_GP01_I, .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, .tuner_config = 2, .antenna_switch= 1, .request_firmware = philips_tda1004x_request_firmware };
Then change:
.i2c_gate from 0x4b to 0x42
and recompile.