TwinhanDTV Digital Terrestrial TV Card Ter: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
mNo edit summary
m (Added category: DVB-T PCI Cards)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
This is about the '''TwinhanDTV Ter Mini''', a [[Twinhan]] [[Budget]] PCI card, capabable of recieving only-digital TV and radio (DVB-T). It's also capabable of [[HDTV]] standard 1080i, which I haven't tested as there is no HDTV transmission in UK (and whole Europe) yet. Otherwise, the card works well with Linux.
This is about the '''TwinhanDTV Ter Mini''', a [[TwinHan]] [[Budget]] PCI card, capabable of recieving only-digital TV and radio (DVB-T). It's also capabable of [[HDTV]] standard 1080i, which I haven't tested as there is no HDTV transmission via DVB-T in UK (and whole Europe) yet. Otherwise, the card works well with Linux.


On the package it says: "TwinhanDTV Digital Terrestrial TV Card Ter" but then actually on the side it's ticked "Mini Ter (Low Profile)" (and not "Ter (Standard)"). There's also a sticker saying "Model 3020C".
On the package it says: "TwinhanDTV Digital Terrestrial TV Card Ter" but then actually on the side it's ticked "Mini Ter (Low Profile)" (and not "Ter (Standard)"). There's also a sticker saying "Model 3020C".
Line 5: Line 5:
Company page: [http://www.twinhan.com/product_terrestrial_2.asp]
Company page: [http://www.twinhan.com/product_terrestrial_2.asp]


It comes up as Bt878 in lspci:
It comes up as [[Conexant Fusion 878A|Bt878]] in lspci:
Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Line 12: Line 12:
== Howto make it work ==
== Howto make it work ==
=== Driver ===
=== Driver ===
The [[BT878]] chip is supported by new kernel versions -- good news! :)
The [[Conexant Fusion 878A|Bt878]] chip is supported by new kernel versions -- good news! :)


This is what I've done (Debian Sarge testing, kernel version 2.6.16.9). It follows the standard installation of the [[bttv]] driver for DVB as it is included in new kernels.
This is what I've done (Debian Sarge testing, kernel version 2.6.16.9). It follows the standard installation of the [[bttv]] driver for DVB as it is included in new kernels.
Line 21: Line 21:
dvb_core
dvb_core
dst
dst
dvb_bt8xx
dvb-bt8xx
If you can't find all of them, try to load them one by one with '''modprobe''', e.g.
If you can't find all of them, try to load them one by one with '''modprobe''', e.g.
modprobe bt878
modprobe bt878
Line 78: Line 78:


=== Next steps ===
=== Next steps ===
[[First steps with a budget DVB card]]
See [[Testing your DVB device]]
[[Category:DVB-T PCI Cards]]

Latest revision as of 19:57, 4 May 2009

This is about the TwinhanDTV Ter Mini, a TwinHan Budget PCI card, capabable of recieving only-digital TV and radio (DVB-T). It's also capabable of HDTV standard 1080i, which I haven't tested as there is no HDTV transmission via DVB-T in UK (and whole Europe) yet. Otherwise, the card works well with Linux.

On the package it says: "TwinhanDTV Digital Terrestrial TV Card Ter" but then actually on the side it's ticked "Mini Ter (Low Profile)" (and not "Ter (Standard)"). There's also a sticker saying "Model 3020C".

Company page: [1]

It comes up as Bt878 in lspci:

 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)


Howto make it work

Driver

The Bt878 chip is supported by new kernel versions -- good news! :)

This is what I've done (Debian Sarge testing, kernel version 2.6.16.9). It follows the standard installation of the bttv driver for DVB as it is included in new kernels.

Use lsmod to see if you have all these modules already installed and running.

 bttv
 bt878 
 dvb_core
 dst 
 dvb_bt8xx

If you can't find all of them, try to load them one by one with modprobe, e.g.

 modprobe bt878

Now try lsmod again.

If you can find all of them, you don't have to re-compile your kernel but can use the drivers/modules right away (see below). Otherwise:

Kernel re-compile

In kernel configuration (make menuconfig) make sure to have:

  • Under Device Drivers - Multimedia Devices - Video for Linux
 <M> BT 848
 [*] DVB for bt878

which is equivalent to these entries in the kernel .config file:

 CONFIG_VIDEO_BT848=m
 CONFIG_VIDEO_BT848_DVB=y


  • Under Device Drivers - Multimedia Devices - Digital Video Broadcasting Devices
 <M> DVB for Linux
 <M> DVB Core Support

And there under DVB Core Support - Customise DVB Frontends

 <M> ... something like DVB_BT8XX

which is equivalent to these entries in the kernel .config file:

 CONFIG_DVB=y
 CONFIG_DVB_CORE=m
 CONFIG_DVB_BT8XX=y

And maybe (not sure if necessary) still there under ATSC

 <M> Video BTCX

which is equivalent to this entry in the kernel .config file:

 CONFIG_VIDEO_BTCX = m


  • Under Device Drivers - Sound - ALSA - PCI devices
 <M> BT878

which is equivalent to this entry in the kernel .config file:

 CONFIG_SND=y etc. for sound in general 
 CONFIG_SND_BT87X=m

(I may have missed a couple of options. Please add them.) Save the config file, compile your new kernel and restart.


Modules needed

Required modules and parameters:

 bttv
 bt878 
 dvb_core
 dst 
 dvb-bt8xx

Load them using modprobe.

You should now have some stuff in /dev/dvb/adapter0/

That's it. You don't need any firmware stuff. :)

Next steps

See Testing your DVB device