User:Woodsb02

Yuan PD300 Package

Yuan PD300 USBStick

Inside USBStick 1

Inside USBStick 2

I have recently bought a Yuan PD300 mini usb tv card. It looks much like a usb disk/stick and I am hoping to get it working in linux.

Details

lsusb gives the following output:

Bus 004 Device 004: ID 14aa:0220 AVerMedia (again) or C&E

The chips inside it have the following writing:

1) EPCOS X7350P 3356 MXT5

2) MT2060 MOE360007J 0305-A3

3) I3 D AT02

4) CY7C68013a-56LFXC 0515 B 04 KOR CYP 614612

5) 1B15C

6) AIPE12

Other text on the board:

- PD-300 REV 2.3 MADE IN TAIWAN

- BT B 94V-0 0522

- T0540113 (sticker)

News:

It will work but ONLY if you warm boot it inside windows first with the Yakumo BDA driver, then warm boot for instance a KENOTIX 2006 easter-rc4 livecd.

The second you unplug it and replug it, it will not come back up as there's something not right with the linux firmware usb loading side.

Is this problem of a cold boot firmware well known? And is there a fix?

Here's my info for my card

$ lsusb -v

Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E

Device Descriptor:

 bLength                18

 bDescriptorType         1

 bcdUSB               2.00

 bDeviceClass            0 (Defined at Interface level)

 bDeviceSubClass         0 

 bDeviceProtocol         0 

 bMaxPacketSize0        64

 idVendor           0x14aa AVerMedia (again) or C&E

 idProduct          0x0221 

 bcdDevice            5.21

 iManufacturer           1 Digital TV Receiver

 iProduct                2 Digital TV Receiver

 iSerial                 0 

 bNumConfigurations      1

 Configuration Descriptor:

   bLength                 9

   bDescriptorType         2

   wTotalLength           64

   bNumInterfaces          2

   bConfigurationValue     1

   iConfiguration          0 

   bmAttributes         0x80

     (Bus Powered)

   MaxPower              450mA "

$ dmesg

dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.

usbcore: registered new driver dvb_usb_dtt200u "

$ lsmod

dvb_usb_dtt200u 8708 0

dvb_usb 16136 1 dvb_usb_dtt200u

dvb_core 73792 1 dvb_usb

dvb_pll 10372 1 dvb_usb "