VideoSecu DVC1612

From LinuxTVWiki
Revision as of 23:55, 19 February 2018 by MatthewTrescott (talk | contribs) (More information)
Jump to navigation Jump to search
VideoSecu DVC1612 top.jpg
VideoSecu DVC1612 bottom.jpg

Very similar (and probably driver-compatible) cards seem to be sold under the names EverSecu ES-1612, EyeMax DVB1920, and Tibet Systems Progress DVR CS16. The latter's preexisting support in the kernel was how I managed to get this card working. The IDR X016S may also be compatible—the layout of integrated circuits and other components on the card look similar to the VideoSecu DVC1612.

Introduction

The VideoSecu DVC1612 is a 16-channel PCI capture card with 4 Conexant Fusion 878A chips behind a PCI bridge. As suggested by its name, it is designed for security systems and comes with a CD containing a copy of the EyeONet DVR software.

The card has two VGA ports which are used for two VGA-to-BNC splitters (not real VGA). It seems that any of the 16 video inputs can be connected to any of the four Bt878a chips as long as the correct GPIO values are written, as already discovered by whoever added support for the Tibet Systems CS16.

VideoSecu DVC1612 front.jpg

The RCA connector on the left side is presumably for output to an analog screen. To my knowledge, neither this functionality nor audio is currently working.

Using the Card

My intention is to try to have working autodetection for this card, but that may not be possible. Use card=131,131,131,131 as a parameter to the bttv kernel module in the meantime. Video input 1 is named Composite0; Video input 16 is named Composite15. You will know that bttv was not loaded with the proper parameters if Composite0 is connected to video input 16 and video input 16 is the only input that works.