[linux-dvb] Re: Satelco TT_BUDGET problems

[Chris Turbeville <turbo@frognu.flern.com>]

Ok so I have now built the NEWSTRUCT drivers and hurrray:

zapping to 'JADE':
sat 0, frequency = 11860 MHz H, symbolrate 28124000, vpid = 0x1f4a, apid = 0x1f54
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal bb81 | snr d260 | ber 00001100 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bcbe | snr d218 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bbb0 | snr d26f | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal bb80 | snr d107 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

But however I can't get anything to pull video or sound out.  What's the
best technique to get to this stream?  Now the story, this didn't work
for me just using the make insmod in /driver.  I have to construct my
own modules.conf:

alias char-major-250 dvbdev
alias /dev/dvb/* dvbdev
below dvb-ttpci dvbdev dvb_frontend dvb_filter evdev alps_bsru6 ves1820 evdev
options saa7146_core mode=1

The one with the driver has a circular ref in it.  So to run the driver
I use modprobe av7110 and it looks like :
Oct  4 13:27:12 frognu kernel: devfs_mk_dir(dvb): using old entry in
dir: c14285c0 ""
Oct  4 13:27:12 frognu kernel: saa7146_core.o: : bus:0, rev:1,
mem:0xd9bd7000.
Oct  4 13:27:12 frognu kernel: PCI: Found IRQ 11 for device 00:09.0
Oct  4 13:27:12 frognu kernel: PCI: Sharing IRQ 11 with 00:0f.0
Oct  4 13:27:12 frognu kernel: video_dev: unable to get major 250
Oct  4 13:27:12 frognu kernel: dvb_register_adapter: registering new adapter (TT-Budget/WinTV-NOVA-S  PCI).
Oct  4 13:27:27 frognu kernel: dvb_frontend_init: initialising frontend 0:0 (Alps BSRU6)...


As you can see I get video bitches BUT the TT-BUDGET doesn't have any
video so I thought that ok. Here's what a lsmod looks like:


Module                  Size  Used by    Tainted: P  
av7110                 41396   0 (unused)
dvb-ttpci              72304   0 [av7110]
dvb_frontend            7244   0 [av7110 dvb-ttpci]
dvb_filter              9664   0 [av7110 dvb-ttpci]
alps_bsru6              5708   1
ves1820                 3996   0
evdev                   4480   0 (unused)
dvb_demux              10272   1 [av7110 dvb-ttpci]
dmxdev                  7660   1 [av7110 dvb-ttpci]
dvb-core               32592   1 [av7110 dvb-ttpci dvb_frontend
alps_bsru6 ves1820 dmxdev]
input                   3456   0 [dvb-ttpci evdev]
videodev                5792   0 [av7110 dvb-ttpci]

Again if I use the drivers make insmod nothing works and it looks like:
Module                  Size  Used by    Tainted: P  
dvb-ttpci              72272   0 (unused)
evdev                   4480   0 (unused)
input                   3456   0 [dvb-ttpci evdev]
ves1820                 3964   0
grundig_29504-491       3616   0
grundig_29504-401       3624   0
alps_bsrv2              3864   0
alps_bsru6              5708   1
dvb_demux              10240   1 [dvb-ttpci]
dvb-core               32560   2 [dvb-ttpci ves1820 grundig_29504-491
grundig_29504-401 alps_bsrv2 alps_bsru6]
videodev                5792   0 [dvb-ttpci]


Ideas?
Thanks
-Chris


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.