[linux-dvb] WinTV Nova-t problems ..

[Kieran Fulke <kieran@pawsoff.org>]

hello folks, i've been trying to get this damned thing working under 
linux, but i'm having no luck at all.

modules loaded, in order: (debian /etc/modules)

dvb-core dvb_shutdown_timeout=0
dvb-ttpci
budget
budget-patch
tda1004x tda1004x_debug=1

what dmesg says about the above:

ttpci_eeprom: module license 'unspecified' taints kernel.
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
PCI: Found IRQ 5 for device 0000:00:10.0
saa7146: found saa7146 @ mem c8815000 (revision 1, irq 5) 
(0x13c2,0x1011).
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T  PCI).
TT-Budget/WinTV-NOVA-T  PCI adapter 0 has MAC addr = 00:d0:5c:22:27:c6
saa7146: register extension 'budget_patch dvb'.
tda1004x_attach
tda1004x_read_byte: reg=0x0
tda1004x_read_byte: success reg=0x0, data=0x25, ret=2
tda1004x: Detected Philips TDA10045H.
tda1004x_enable_tuner_i2c
tda1004x_write_mask: reg=0x7, mask=0x2, data=0x2
tda1004x_read_byte: reg=0x7
tda1004x_read_byte: success reg=0x7, data=0x0, ret=2
tda1004x_write_byte: reg=0x7, data=0x2
tda1004x_write_byte: success reg=0x7, data=0x2, ret=1
tda1004x: Detected Philips TDM1316L tuner.
tda1004x_disable_tuner_i2c
tda1004x_write_mask: reg=0x7, mask=0x2, data=0x0
tda1004x_read_byte: reg=0x7
tda1004x_read_byte: success reg=0x7, data=0x2, ret=2
tda1004x_write_byte: reg=0x7, data=0x0
tda1004x_write_byte: success reg=0x7, data=0x0, ret=1
DVB: registering frontend 0:0 (Philips TDA10045H)...


try to use the thing; ./scan dvb-t/uk-BlackHill

scanning dvb-t/uk-BlackHill
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 634000000 0 2 0 1 0 3 0
initial transponder 682000000 0 1 0 3 0 3 0
>>> tune to: 
634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
__tune_to_transponder:1225: ERROR: Setting frontend parameters failed: 
22 Invalid argument
>>> tune to: 
634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
__tune_to_transponder:1225: ERROR: Setting frontend parameters failed: 
22 Invalid argument
ERROR: initial tuning failed
dumping lists (0 services)
Done.

uk-BlackHill contains the following line
 "T 634000000 8MHz 2/3 NONE QAM16 2k 1/4 NONE"
which is the config for the BBC mux, or so the windows utility says.

any help would be appreciated,

regards.



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.