[linux-dvb] scantv hangs

[Michael Meyer <meyer_michael@gmx.net>]

First of all thanks for that great software!

I am using the Siemens DVB-C Card with analoge module. VDR works great.

Now I try to activate the analoge module. It works, but only partially. There is
even sound. I cannot switch between analoge channels. scantv hangs after it has 
discovered 2 or so channels. While santv is discovering channels, I can see them 
with xawtv. Interupting scantv will  keep that channel switching to dvb (vdr is 
running) works. Letting scantv to continue results scantv hangs. 

The configuration of my Debian-like (sarge) box is: 
Kernel : 2.4.22
xawtv  : 3.89-0.1
vdr    : 1.2.2
dvb    : latest CVS-Version (09.11.2003)

Here my commands and errors:

> cd <PATH2DVB>/dvb-kernel/build-2.4
> getlinks
> make
> make install
> ./insmod load
> dmesg
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget dvb /w video in'.
saa7146: register extension 'dvb'.
PCI: Found IRQ 4 for device 00:0a.0
PCI: Setting latency timer of device 00:0a.0 to 64
saa7146_core: found saa7146 @ mem dc925000 (revision 1, irq 4) (0x110a,0x0000).
DVB: registering new adapter (Siemens cable card PCI rev1.5).
DVB: VES1820(0): setup for tuner spXXXX
DVB: VES1820(0): pwm=0x52
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Siemens cable card PCI rev1.5 adapter 0 has MAC addr = 00:d0:5c:01:83:9f
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): DVB-C analog module detected, initializing MSP3400
av7110(0): MSP3400 version 0x0303 0x0008
saa7146_fops: saa7146 (0): registered device video0 [v4l2]
saa7146_fops: saa7146 (0): registered device vbi0 [v4l2]
av7110: found av7110-0.

> tail -f /var/log/messages &
> scantv

please select your TV norm
   0: PAL
   1: NTSC
nr ? Nov  9 17:21:32 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:32 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000
0

please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia
nr ? 5
[global]
freqtab = europe-west

[defaults]
input = Television
norm = PAL

ioctl: VIDIOC_S_FREQUENCY(tuner=0;type=ANALOG_TV;frequency=0): Invalid argument

scanning channel list europe-west...
E2   ( 48.25 MHz): Nov  9 17:21:39 bogumil kernel: av7110: switching DVB mode
Nov  9 17:21:39 bogumil kernel: av7110: switching to analog TV
Nov  9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000
Nov  9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:39 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000

???
[unknown (E2)]
channel = E2

E3   ( 55.25 MHz): Nov  9 17:21:43 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:43 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000
???
[unknown (E3)]
channel = E3

E4   ( 62.25 MHz): Nov  9 17:21:47 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:47 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000
???
[unknown (E4)]
channel = E4

S01  ( 69.25 MHz): Nov  9 17:21:51 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:51 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000
Nov  9 17:21:53 bogumil kernel: VIDIOC_G_TUNER: msp3400 TV standard detection: 0xa000
Nov  9 17:21:53 bogumil kernel: VIDIOC_G_TUNER: msp3400 stereo detection: 0x0000

Thanks for any help.
Michael



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.