[linux-dvb] Re: Problem with SKY2PC 2.3 on slower machine

[Nico <nsabbi@tiscali.it>]

Nothng is coming out of /dev/dvb/adapter0/frontend0.
RTL should go, but what you are trying to tune to with dvb:// is 
Premiere (12070) , which is encrypted,
so you can't get it.

Have you tried other frequencies?

http://www.lyngsat.com/astra19.shtml



Petar Ristic wrote:

> I downloaded linuxtv-dvb-1.0.0.tar.gz, compile ...
>  
> insmod with:
> insmod dvb-core dvb_shutdown_timeout=0
> insmod mt312
> insmod skystar2
>  
> szap look OK:
>  
> /usr/local/bin/szap -c /etc/channels.conf -n 2 -r  -x
>  
> reading channels from file '/etc/channels.conf'
> zapping to 'RTL':
> sat 0, frequency = 12188 MHz H, symbolrate 27500000, vpid = 0x00a3, 
> apid = 0x0068
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> status 03 | signal 3eaa | snr c85b | ber 00000000 | unc 00000000 |
> status 1b | signal 3ec7 | snr ccff | ber 00000000 | unc 00000000 | 
> FE_HAS_LOCK
> But there is problem:
> When use mplayer I got this:
>  
> mplayer - < /dev/dvb/adapter0/dvr0
>  
> MPlayer dev-CVS-040104-06:00-3.3.1 (C) 2000-2003 MPlayer Team
>  
> CPU: Intel Celeron A Mendocino/Pentium II Dixon 501.6 MHz (Family: 6, 
> Stepping: 5)
> Detected cache-line size is 32 bytes
> CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
> Compiled for x86 CPU with extensions: MMX
>  
> Reading config file /usr/local/etc/mplayer/mplayer.confReading config 
> file /root/.mplayer/config
> Reading /root/.mplayer/codecs.conf: Reading 
> /usr/local/etc/mplayer/codecs.conf: Using built-in default codecs.conf.
> font: can't open file: /root/.mplayer/font/font.desc
> font: can't open file: /usr/local/share/mplayer/font/font.desc
> Using usleep() timing
> Setting up LIRC support...
>  
> Playing -.
> Reading from stdin...
>  
> program stopped here and there no video window...
> also...
>  
> mplayer dvb://
>  
> MPlayer dev-CVS-040104-06:00-3.3.1 (C) 2000-2003 MPlayer Team
>  
> CPU: Intel Celeron A Mendocino/Pentium II Dixon 501.7 MHz (Family: 6, 
> Stepping: 5)
> Detected cache-line size is 32 bytes
> CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
> Compiled for x86 CPU with extensions: MMX
>  
> Reading config file /usr/local/etc/mplayer/mplayer.confReading config 
> file /root/.mplayer/config
> Reading /root/.mplayer/codecs.conf: Reading 
> /usr/local/etc/mplayer/codecs.conf: Using built-in default codecs.conf.
> font: can't open file: /root/.mplayer/font/font.desc
> font: can't open file: /usr/local/share/mplayer/font/font.desc
> Using usleep() timing
> Setting up LIRC support...
>  
> Playing dvb://.
> TUNER TYPE SEEMS TO BE DVB-S
> code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> dvb_tune Freq: 12070000
> TS file format detected.
> DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
> PROBING UP TO 2000000, PROG: 0
> NO VIDEO! NO AUDIO!  NO SUBS (yet)!
> Opened TS demuxer, audio: ffffffff(pid -1), video: ffffffff(pid 
> -1)...POS=0
> TS file format detected.
> DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
> PROBING UP TO 2000000, PROG: 0
> NO VIDEO! NO AUDIO!  NO SUBS (yet)!
> Opened TS demuxer, audio: ffffffff(pid -1), video: ffffffff(pid 
> -1)...POS=0
> TS file format detected.
> DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
> PROBING UP TO 2000000, PROG: 0
> NO VIDEO! NO AUDIO!  NO SUBS (yet)!
> Opened TS demuxer, audio: ffffffff(pid -1), video: ffffffff(pid 
> -1)...POS=0
>  
> Exiting... (End of file)
>  
>  
>  
> When use xin, program loaded, blocked and cannot be ended.
>  
> Machine is Celeron 333 overclocked on 500 with Microchip mr748mr board 
> (SIS620 integrated graphic).Card is SKY2PC v2.3. System is SuSe 9.0. 
> Everything work ok on w98.
>  
> What is problem??? or What I do wrong?
>  
>  




--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.