[linux-dvb] Re: VP-1020 dvb card and tuning

To: bomm98@yahoo.com
Subject: [linux-dvb] Re: VP-1020 dvb card and tuning
From: "Richard -=[]=-" <micro_flyer@hotmail.com>
Date: Tue, 06 Apr 2004 15:47:05 +0000
Bcc:
Cc: linux-dvb@linuxtv.org
Content-type: text/plain; format=flowed
Importance: High
List-help: <mailto:ecartis@convergence.de?Subject=help>
List-id: linux-dvb <linux-dvb.listen>
List-software: Ecartis version 1.0.0
List-unsubscribe: <https://mail.convergence2.de/cgi-bin/listen.cgi>
Sender: linux-dvb-bounce@linuxtv.org

Hi there Mike,

Thanks for the trouble :-)

after loading bttv,dvb-bt8xx and dst, here is the output. Might have had big fingers earlier and done something wrong ;-)

The kernel I am using is a stock standard Mandrake 10 (2.6.3)

Card0 is DVB and card1 is a TV card.

Best Regards
Richard

----------------- messages output ---------------
Apr 6 17:31:56 localhost kernel: bttv: driver version 0.9.12 loaded
Apr 6 17:31:56 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Apr 6 17:31:56 localhost kernel: bttv: Bt8xx card found (0).
Apr 6 17:31:56 localhost kernel: bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 5, latency: 64, mmio: 0xfb800000
Apr 6 17:31:56 localhost kernel: bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
Apr 6 17:31:56 localhost kernel: bttv0: using: Twinhan DST + clones [card=113,autodetected]
Apr 6 17:31:56 localhost kernel: bttv0: using tuner=4
Apr 6 17:31:56 localhost kernel: bttv0: add subdevice "dvb0"
Apr 6 17:31:56 localhost kernel: bttv: Bt8xx card found (1).
Apr 6 17:31:56 localhost kernel: bttv1: Bt878 (rev 2) at 0000:01:07.0, irq: 5, latency: 64, mmio: 0xfa800000
Apr 6 17:31:56 localhost kernel: bttv1: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Apr 6 17:31:56 localhost kernel: bttv1: using: Hauppauge (bt878) [card=10,autodetected]
Apr 6 17:31:56 localhost kernel: bttv1: Hauppauge/Voodoo msp34xx: reset line init [5]
Apr 6 17:31:56 localhost kernel: bttv1: Hauppauge eeprom: model=61295, tuner=Philips FI1246 MK2 (1), radio=no
Apr 6 17:31:56 localhost kernel: bttv1: using tuner=1
Apr 6 17:31:56 localhost kernel: bttv1: i2c: checking for MSP34xx @ 0x80... not found
Apr 6 17:31:56 localhost kernel: bttv1: i2c: checking for TDA9875 @ 0xb0... not found
Apr 6 17:31:56 localhost kernel: bttv1: i2c: checking for TDA7432 @ 0x8a... not found
Apr 6 17:31:56 localhost kernel: bttv1: registered device video0
Apr 6 17:31:56 localhost kernel: bttv1: registered device vbi0
Apr 6 17:31:57 localhost kernel: bttv1: PLL: 28636363 => 35468950 . ok
Apr 6 17:32:08 localhost kernel: bt878: AUDIO driver version 0.0.0 loaded
Apr 6 17:32:08 localhost kernel: bt878: Bt878 AUDIO function found (0).
Apr 6 17:32:08 localhost kernel: bt878(0): Bt878 (rev 17) at 01:06.1, irq: 5, latency: 64, memory: 0xfb000000
Apr 6 17:32:08 localhost kernel: bt878: Bt878 AUDIO function found (1).
Apr 6 17:32:08 localhost kernel: bt878(1): Bt878 (rev 2) at 01:07.1, irq: 5, latency: 64, memory: 0xfa000000
Apr 6 17:32:08 localhost kernel: dvb_bt8xx_init: unknown card_id found 13EB0070
Apr 6 17:32:08 localhost kernel: dvb_bt8xx_init: unknown card_type found A, NOT LOADED
Apr 6 17:32:08 localhost kernel: dvb_bt8xx_init: unknown card_nr found 1
Apr 6 17:32:08 localhost kernel: attach: checking "bt878 #0 [hw]"
Apr 6 17:32:08 localhost kernel: find by pci: checking "bt878 #0 [hw]"
Apr 6 17:32:08 localhost kernel: attach: "bt878 #0 [hw]", to card 0
Apr 6 17:32:08 localhost kernel: attach: checking "bt878 #1 [hw]"
Apr 6 17:32:08 localhost kernel: find by pci: checking "bt878 #1 [hw]"
Apr 6 17:32:08 localhost kernel: DVB: registering new adapter (DST).
Apr 6 17:32:22 localhost kernel: dst_attach: check ci
Apr 6 17:32:22 localhost kernel: bt878 find by dvb adap: checking "DST"
Apr 6 17:32:22 localhost kernel: write_dst writing 0x00 0x06 0x00 0x00 0x00 0x00 0x00 0xfa
Apr 6 17:32:22 localhost kernel: read_dst reply is 0xff
Apr 6 17:32:22 localhost kernel: dst_wait_dst_ready: dst wait ready after 0
Apr 6 17:32:22 localhost kernel: read_dst reply is 0x44
Apr 6 17:32:22 localhost kernel: 0x53 0x54 0x2d 0x30 0x33 0x54 0x31
Apr 6 17:32:22 localhost kernel: dst_check_ci: recognize DST-03T
Apr 6 17:32:22 localhost kernel: DST type : satellite
Apr 6 17:32:22 localhost kernel: dst_check_ci: user override dst type flags 0x1
Apr 6 17:32:22 localhost kernel: DST type flags : 0x1 newtuner
Apr 6 17:32:22 localhost kernel: dst_attach: register dst c2fdfce0 bt cf86e9c0 i2c c63e2a80
Apr 6 17:32:22 localhost kernel: DVB: registering frontend 0:0 (DST SAT)...

------- Here is the scan results ----------
Apr 6 17:38:02 localhost kernel: write_dst writing 0x00 0x09 0x00 0xff 0x01 0x00 0x00 0xf7
Apr 6 17:38:02 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:02 localhost kernel: dst_wait_dst_ready: dst wait ready after 0
Apr 6 17:38:02 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:02 localhost kernel: 0x9 0x2c 0xb0 0x0 0x5 0xfb 0x1b
Apr 6 17:38:02 localhost kernel: write_dst writing 0x00 0x09 0x00 0xff 0x01 0x00 0x00 0xf7
Apr 6 17:38:02 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:02 localhost kernel: dst_wait_dst_ready: dst wait ready after 0
Apr 6 17:38:02 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:02 localhost kernel: 0x9 0x2c 0xb0 0x0 0x5 0xfb 0x1b
Apr 6 17:38:02 localhost kernel: write_dst writing 0x00 0x08 0x04 0xe0 0x10 0x38 0xf0 0xdc
Apr 6 17:38:02 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:03 localhost kernel: dst_wait_dst_ready: dst wait ready after 22
Apr 6 17:38:03 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:03 localhost kernel: 0x8 0x2c 0xb0 0x0 0x5 0xfb 0x1c
Apr 6 17:38:03 localhost kernel: write_dst writing 0x00 0x09 0x00 0xff 0x01 0x00 0x00 0xf7
Apr 6 17:38:03 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:03 localhost kernel: dst_wait_dst_ready: dst wait ready after 0
Apr 6 17:38:03 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:03 localhost kernel: 0x9 0x2c 0xb0 0x0 0x5 0xfb 0x1b
Apr 6 17:38:03 localhost kernel: dst_write_tuna: type_flags 0x1
Apr 6 17:38:03 localhost kernel: write_dst writing 0x09 0x00 0x07 0x34 0x01 0x00 0x6b 0x6c 0x20 0xc4
Apr 6 17:38:03 localhost kernel: write_dst: write_dst error (err == -5, len == 0x0a, b0 == 0x09)
Apr 6 17:38:06 localhost last message repeated 3 times
Apr 6 17:38:07 localhost kernel: dst_write_tuna: write not successful
Apr 6 17:38:09 localhost kernel: write_dst writing 0x00 0x09 0x00 0xff 0x01 0x00 0x00 0xf7
Apr 6 17:38:09 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:09 localhost kernel: dst_wait_dst_ready: dst wait ready after 0
Apr 6 17:38:09 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:09 localhost kernel: 0x9 0x2c 0xb0 0x0 0x5 0xfb 0x1b
Apr 6 17:38:09 localhost kernel: write_dst writing 0x00 0x08 0x04 0xe0 0x10 0x38 0xf0 0xdc
Apr 6 17:38:10 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:10 localhost kernel: dst_wait_dst_ready: dst wait ready after 22
Apr 6 17:38:10 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:10 localhost kernel: 0x8 0x2c 0xb0 0x0 0x5 0xfb 0x1c
Apr 6 17:38:10 localhost kernel: write_dst writing 0x00 0x09 0x00 0xff 0x01 0x00 0x00 0xf7
Apr 6 17:38:10 localhost kernel: read_dst reply is 0xff
Apr 6 17:38:10 localhost kernel: dst_wait_dst_ready: dst wait ready after 0
Apr 6 17:38:10 localhost kernel: read_dst reply is 0x0
Apr 6 17:38:10 localhost kernel: 0x9 0x2c 0xb0 0x0 0x5 0xfb 0x1b
Apr 6 17:38:10 localhost kernel: dst_write_tuna: type_flags 0x1
Apr 6 17:38:10 localhost kernel: write_dst writing 0x09 0x00 0x07 0x34 0x01 0x00 0x6b 0x6c 0x20 0xc4
Apr 6 17:38:10 localhost kernel: write_dst: write_dst error (err == -5, len == 0x0a, b0 == 0x09)
Apr 6 17:38:13 localhost last message repeated 3 times
Apr 6 17:38:14 localhost kernel: dst_write_tuna: write not successful

From: Mike <bomm98@yahoo.com>
To: "Richard -=\[\]=-" <micro_flyer@hotmail.com>
Subject: Re: [linux-dvb] VP-1020 dvb card and tuning
Date: Tue, 6 Apr 2004 07:04:34 -0700 (PDT)

Hmmm.. looks like the type flags are not set
in your log:
> dst_write_tuna: type_flags 0x0

Were the flags accepted during loading? From the source code
I would expect some ".. user override dst type flags .." output here.

Not sure if this is implemented completely in the driver...

Which version of DVB drivers are you using and which kernel ?

I would also recommend a more complete syslog from /var/log/messages
instead of dmesg outputs

Regards
  Michael

m/design_giveaway/

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail

--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.

Prev by Date: [linux-dvb] Re: VP-1020 dvb card and tuning
Next by Date: [linux-dvb] Re: V4 API questions
Previous by thread: [linux-dvb] Re: VP-1020 dvb card and tuning
Next by thread: [linux-dvb] Continuity counter inconsistency
Index(es):
- Date
- Thread

Home | Main Index | Thread Index