[linux-dvb] Re: AVerMedia 771 problems [solved]

[Dirk Meyer <dmeyer@informatik.uni-bremen.de>]

Dirk Meyer wrote:
> But now I have a new problem: I can't find any channels. I tested the
> setup with windows, it is working. But when using dvbscan with a large
> number of passible frequences, I still get no channels.
>
> Here is my dmesg output:
> bttv: driver version 0.9.14 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 11 for device 0000:00:0c.0
> PCI: Sharing IRQ 11 with 0000:00:0c.1
> bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 64, mmio: 0xdebfe000
> bttv0: detected: AVermedia DVB-T 771 [card=121], PCI subsystem ID is 1461:0771
> bttv0: using: AVerMedia AVerTV DVB-T 771 [card=121,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=0090000f [init]
> bttv0: using tuner=-1
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: PLL: 28636363 => 35468950 . ok
> bttv0: add subdevice "remote0"
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> PCI: Found IRQ 11 for device 0000:00:0c.1
> PCI: Sharing IRQ 11 with 0000:00:0c.0
> bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 64, memory: 0xdebff000
> attach: checking "bt878 #0 [hw]"
> find by pci: checking "bt878 #0 [hw]"
> attach: "bt878 #0 [hw]", to card 0
> DVB: registering new adapter (Ave).
> DVB: registering frontend 0:0 (DVB-T Zarlink MT352 demodulator driver)...
>
> Using Linux 2.6.7 + dvb-cvs. 
>
>
> Looks good, except: using tuner=-1. Is this a problem? Does someone
> has a working channels.conf for Bremen, Germany?

Small update: I now have a channels.conf and something for dvbscan
which should work in Bremen. But it doesn't :-(

Scanning always gives me 'tuning failed' for each frequence. 


Dirk

-- 
Claiming that your operating system is the best in the world because
more people use it is like saying McDonalds makes the best food in the
world.