[linux-dvb] Re: Nova-t problem

[Nico Sabbi <nsabbi@tiscali.it>]

Il mar, 2004-07-27 alle 23:42, Mike Ryan ha scritto:
> The mailer cut half my mail off, as I put a single dot on a line, so here it is
> again:
> 
> Thanks to John and Jesper for the prompt reply. I tried that, and things looks
> a
> little different.
> 
> I do this on one screen and leave it running:
> tzap -a 0 -r "BBC ONE"
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> reading channels from file '/root/.tzap/channels.conf'
> tuning to 505833330 Hz
> video pid 0x0258, audio pid 0x0259
> status 0d | signal 3030 | snr dddd | ber 000064e9 | unc 0000000a |
> status 1f | signal 3030 | snr ebeb | ber 0000003e | unc 00000000 | FE_HAS_LOCK
> status 1f | signal 3030 | snr ebeb | ber 0000003f | unc 00000000 | FE_HAS_LOCK
> status 1f | signal 3030 | snr eaea | ber 0000003c | unc 00000000 | FE_HAS_LOCK
> status 1f | signal 3030 | snr e9e9 | ber 0000004a | unc 00000000 | FE_HAS_LOCK
> status 1f | signal 3030 | snr eaea | ber 00000048 | unc 00000000 | FE_HAS_LOCK
> etc, etc
> 
> 


you can run either tzap xor dvbstream at any one time :)
so either 
1) tzap -r on a terminal and mplayer - < /dev/dvb/adapter0/dvr0
2) or ./dvbstream -o -qam 16 -cr 3_4 600 601 | mplayer -
3) or even better setup a ~mplayer/channels.conf  and run mplayer
dvb://CHANNEL_NAME

> and this on another one:
> [root@linuxpvr dvbstream]#  ./dvbstream -ps -qam 16 -cr 3_4 600 601 | mplayer -
> dvbstream v0.6 - (C) Dave Chapman 2001-2004
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> dvbstream will stop after -1 seconds (71582788 minutes)
> Setting filter for PID 600
> Setting filter for PID 601
> Using 224.0.1.2:5004:2
> version=2
> Streaming 2 streams
> MPlayer 1.0pre4-3.3.3 (C) 2000-2004 MPlayer Team
>  [snip]
		Nico