Hi,
I've got a Hercules Card (Smart Satellite, version 3), with CI. The
DST-frontend can't recognise my CI. Is there some way to disable the
CI? I've tried it by checking out the dst_check_ci-call, but even than
my card isn't working. The /dev/dvb/adapter0/frontend0 is saying
"Invalid Argument".
Is this card supported for linux? What's wrong? Thanks in advance for your help.
Martijn.
Here's my dmesg-log:
===== dmesg ========================================
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 11, latency: 32, mmio: 0xdf000000
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00fffffd [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 11, latency: 32, memory: 0xde800000
dvb_bt8xx: enumerating available bttv cards...
dvb_bt8xx: identified card0 as DST DVB-S
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
DVB: registering new adapter (DST).
bt878 debug: bt878_start (ctl=02204f2c)
bt878: risc len lines 64, bytes per line 2048
dst_attach: check ci
bt878 find by dvb adap: checking "DST"
write_dst writing 0x00 0x06 0x00 0x00 0x00 0x00 0x00 0xfa
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_check_ci: write not successful, maybe no card?
==== end dmesg =================================
www.lycosmail.nl - Gratis 15 MB mailbox - Nu ook hotmail via Lycos Mail!