[linux-dvb] Re: Hauppage Nexus CA is teasing me....

[johan <johan@linuxdomain.nl>]

i have a nexus-s card and these are my modules.

modprobe dvb-ttpci
modprobe stv0299

greetz,
johan



On Mon, 25 Oct 2004, Mattia Rossi wrote:

> On Mon, 25 Oct 2004 13:21:46 +0200
> timkaiser@t-online.de (Tim Kaiser) wrote:
>
> > Hi Mattia!
>
> Hi Tim
>
> > Thankyou for your fast answer.
> > Here is the result from my fresh kernel. I build up 3 kernels with different
> > PnP configurations. I get the same results.
> > You were right: PnP was disabled in the bios.
> >
>
>
> Actually, that was how I intended it to be (leave the Pnp option in the BIOS
> disabled) but ... you never know.
>
> > I've taken the firmware "dvb-ttpci-01.fw-261c"  from the server, compiled
> > direct into the driver.
> > Do you have a tip for me what to now??
> >
> > Best regards
> >
> > Tim
> >
> > --dmesg--
> > saa7146: register extension 'dvb'.
> > PCI: Enabling device 0000:02:00.0 (0004 -> 0006)
> > ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 209
> > saa7146: found saa7146 @ mem fa888000 (revision 1, irq 209) (0x13c2,0x000a).
> > DVB: registering new adapter (Octal/Technotrend DVB-C for iTV).
> > Octal/Technotrend DVB-C for iTV adapter 0 has MAC addr = 00:d0:5c:24:43:e6
> > gpioirq unknown type=0 len=0
> > DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
> > DVB: AV7111(0) - firmware supports CI link layer interface
> > av7110(0): adac type set to 0
> > videodev: "av7110" has no release callback. Please fix your driver for proper
> > sysfs support, see http://lwn.net/Articles/36850/
> > saa7146_vv: saa7146 (0): registered device video0 [v4l2]
> > av7110: found av7110-0.
> > ------------------------------------------------------
>
> Well, the firmware was loaded correctly, now you have to load the frontend
> module.
> I am sorry but I never had a DVB-C (Cable) so I don't really know what frontend
> it could be using.
>
> Take care
>
> Mattia
>
>
>