[linux-dvb] technotrend 1300 budget + dvb-t start in hamburg

[Christian Pelster <pelle@pellepelster.de>]

hi,

i just finished preparing for the dvb-t start in hamburg on monday, but 
something seems to be wrong:

at first some data about my system:

card: technotrend 1300 budget
kernel: 2.6.9
linux-tv apps: 1.1.0
lsmod:
------------------
Module                  Size  Used by
loop                   12360  0
dvb_ttpci              69900  0
saa7146_vv             44672  1 dvb_ttpci
v4l1_compat            12932  1 saa7146_vv
bttv                  144716  0
video_buf              16580  2 saa7146_vv,bttv
v4l2_common             4864  2 saa7146_vv,bttv
btcx_risc               3720  1 bttv
videodev                7104  2 saa7146_vv,bttv
tda1004x               16964  1
ohci_hcd               17732  0
aty128fb               16192  0
budget_ci               7744  0
budget_core             6020  1 budget_ci
dvb_core               77672  4 dvb_ttpci,tda1004x,budget_ci,budget_core
saa7146                14884  4 dvb_ttpci,saa7146_vv,budget_ci,budget_core
ttpci_eeprom            2176  2 dvb_ttpci,budget_core
------------------

dmesg:
------------------
saa7146: register extension 'budget_ci dvb'.
saa7146: found saa7146 @ mem e194a000 (revision 1, irq 17) (0x13c2,0x1011).
DVB: registering new adapter (TT-Budget/WinTV-NOVA-T  PCI).
TT-Budget/WinTV-NOVA-T  PCI adapter 0 has MAC addr = 00:d0:5c:22:2e:7d
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
tda1004x: Detected Philips TDA10045H.
tda1004x: Detected Philips TD1316 tuner.
DVB: registering frontend 0:0 (Philips TDA10045H)...
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
saa7146: register extension 'dvb'.
------------------

my "experimental" channels.conf:
------------------
ARD:762000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:512:650
ZDF:762000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:513:651
NDR:762000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:514:652
------------------

...now my problem: from what i understood so far, invoking tzap "NDR" -r 
should give me something like:

------------------
status 01xf | ... | .......| FE_HAS_LOCK
------------------

but when i invoke tzap it gives me:

------------------
julia szap # tzap "NDR" -r
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 762000000 Hz
video pid 0x0202, audio pid 0x028c
status 00 | signal c6c6 | snr 0000 | ber 0001fffe | unc 00000000 |
status 00 | signal c6c6 | snr 0000 | ber 0001fffe | unc 00000000 |
status 00 | signal c7c7 | snr 8585 | ber 00000000 | unc 00000000 |
status 00 | signal c7c7 | snr 0000 | ber 0001fffe | unc 00000000 |
------------------

does this mean my config is broke (no status 01xf) or just "wait until monday 
you moron"?

greetings, 

  pelle