[linux-dvb] nxt6000 frontend does nothing

[Jukka Tastula <jukka.tastula@kotinet.com>]

In current dvb-kernel cvs the nxt6000 frontend module doesn't seem to find 
my nebula anymore:

Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 10, latency: 32, mmio: 
0xe2103000
bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID is 
0071:0101
bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffbdcf [init]
bttv0: IRQ lockup, cleared int mask [bits: GPINT*]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: add subdevice "dvb0"
bttv: Bt8xx card found (1).
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 5 (level, low) -> IRQ 5
bttv1: Bt878 (rev 17) at 0000:00:09.0, irq: 5, latency: 32, mmio: 
0xe2101000
bttv1: detected: ChainTech digitop DST-1000 DVB-S [card=113], PCI subsystem 
ID is 270f:fc00
bttv1: using: Twinhan DST + clones [card=113,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00fbe9fe [init]
bttv1: using tuner=4
tuner: Ignoring new-style parameters in presence of obsolete ones
bttv1: add subdevice "dvb1"
bt878: Unknown parameter `bt878_verbose'
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:00:08.1[A] -> GSI 10 (level, low) -> IRQ 10
bt878(0): Bt878 (rev 17) at 00:08.1, irq: 10, latency: 32, memory: 
0xe2100000
bt878: Bt878 AUDIO function found (1).
ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 5 (level, low) -> IRQ 5
bt878(1): Bt878 (rev 17) at 00:09.1, irq: 5, latency: 32, memory: 
0xe2102000
dvb_bt8xx: Unknown bttv card type: 104.
DVB: registering new adapter (bttv1).
dst_check_ci: recognize DTTDIG
DST type : terrestial TV
DST type flags :
DVB: registering frontend 0 (DST DVB-T)...

Someone simply forgot to put card type 104 in there too?

This is with a 2.6.9 kernel with no other patches, the modules that came 
with the kernel detect everything just fine:

bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:00:08.1[A] -> GSI 10 (level, low) -> IRQ 10
bt878(0): Bt878 (rev 17) at 00:08.1, irq: 10, latency: 32, memory: 
0xe2100000
bt878: Bt878 AUDIO function found (1).
ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 5 (level, low) -> IRQ 5
bt878(1): Bt878 (rev 17) at 00:09.1, irq: 5, latency: 32, memory: 
0xe2102000
dvb_bt8xx_init: unknown card_id found FC00270F
dvb_bt8xx_init: bttv type set to Twinhan DST
attach: checking "ISA main adapter"
attach: checking "bt878 #0 [sw]"
find by pci: checking "bt878 #0 [sw]"
attach: "bt878 #0 [sw]", to card 0
attach: checking "bt878 #1 [hw]"
find by pci: checking "bt878 #1 [hw]"
attach: "bt878 #1 [hw]", to card 1
DVB: registering new adapter (Neb).
DVB: registering new adapter (DST).
bt878 find by dvb adap: checking "Neb"
bt878 find by dvb adap: checking "DST"
dst_check_ci: recognize DTTDIG
DST type : terrestial TV
DST type flags :
DVB: registering frontend 1:0 (DST TERR)...
DVB: registering frontend 0:0 (NxtWave NXT6000)...