[linux-dvb] Cinergy 1200 DVB-T

[Philip Axer <paxer@nyware.de>]

Hi,
I've some Problems with my Cinergy 1200 DVB-T PCI card.
I'm running suse 9.2 linux with suse's latest kernel 2.6.8-24.10-default.
The buildin dvb drivers didn't work for me, so I installed downloades / 
build / tested the latest cvs snapshot.
I used the get_dvb_firmware script to download dvb-fe-tda10046.fw.
Everything went fine till dvbscan made some strange stuff.
It looks like the tuner couldn't change the frequency! It was possible to set  
it to 658000000 (with xawtv4). In my region 4 channels are transmitted on 
this freq, it's no problem to view all of them. but setting other frequencies 
either with xawtv4 or with dvbscan is impossible.
dmesg doesn't make errors.
here is the dvbscan output:



dvbscan /usr/share/dvb/dvb-t/de-Braunschweig
scanning /usr/share/dvb/dvb-t/de-Braunschweig
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 490000000 0 2 9 1 1 3 0
initial transponder 498000000 0 2 9 1 1 3 0
initial transponder 658000000 0 2 9 1 1 3 0
initial transponder 786000000 0 2 9 1 1 3 0
>>> tune to: 
490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 
490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 
498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 
498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 
658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 
658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 
786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 
786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.



Thanks
Philip Axer