[linux-dvb] Re: Twinhan DVB-T, 2.6.10 kernel, and udev - where to start?!

[<linuxtv@whitear.org>]

> From: linux-dvb-bounce@linuxtv.org [mailto:linux-dvb-bounce@linuxtv.org]
> On Behalf Of Manu Abraham
>
> > DVB: registering new adapter (bttv0).
> > write_dst writing 0x00 0x06 0x00 0x00 0x00 0x00 0x00 0xfa
> > write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
> > write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
> > write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
> > write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
> > dst_check_ci: write not successful, maybe no card?
> That's why you don't have any frontend at all, Failed to recognize the
> card ..
> This could be a possible i2c problem also.. Maybe you can try the card in
> another slot or under Windows.

I've tried it under Windows now, and it works OK, so I guess the card's not
fried (good news!)

> > > Is this with/without my patches ?
> >
> > This is without any patches - vanilla kernel drivers only. I'll try it
> Try it with my patches, even i was seeing lot of errors when i upgraded to
> the new CVS after a long period of time.. and that was the reason i made
> those patches ..
> 
> That should probably solve your problem, if your card has not been fried
> up..
>

I'm a CVS newbie - if I check out a current CVS, will your patch apply
against that, and should I also use a recent bttv snapshot?

Cheers,


Jon