[linux-dvb] Re: How to load/unload kernel modules

[Martin Theodor Grewe <m.grewe@gmx.de>]

Hi dvb-member,

> > See the modprobe and modprobe.conf man pages.
> Thank you, but there is nothing related to dvb in my /etc/modprobe.d/
>  So, i don't understand how dvb modules are loaded !!
* schnippel *

modinfo dvb_ttpci

filename: 
/lib/modules/2.6.10/kernel/drivers/media/dvb/ttpci/dvb-ttpci.ko
description:    driver for the SAA7146 based AV110 PCI DVB cards by 
Siemens, Technotrend, Hauppauge
author:         Ralph Metzler, Marcus Metzler, others
license:        GPL
vermagic:       2.6.10 PENTIUM4 gcc-3.3
depends: 
saa7146,stv0299,i2c-core,saa7146_vv,ttpci-eeprom,ves1x93,stv0297,sp8870,tda8083,ves1820
alias:          pci:v00001131d00007146sv000013C2sd00000000bc*sc*i*
alias:          pci:v00001131d00007146sv000013C2sd00000001bc*sc*i*
alias:          pci:v00001131d00007146sv000013C2sd00000002bc*sc*i*
alias:          pci:v00001131d00007146sv000013C2sd00000003bc*sc*i*
alias:          pci:v00001131d00007146sv000013C2sd00001002bc*sc*i*
alias:          pci:v00001131d00007146sv0000110Asd00000000bc*sc*i*
alias:          pci:v00001131d00007146sv000013C2sd0000000Abc*sc*i*
alias:          pci:v00001131d00007146sv000013C2sd00000006bc*sc*i*
parm:           budgetpatch:use budget-patch hardware modification: 
default 0 (0 no, 1 autodetect, 2 always)
parm:           volume:initial volume: default 255 (range 0-255)
parm:           rgb_on:For Siemens DVB-C cards only: Enable RGB control 
signal on SCART pin 16 to switch SCART video mode from CVBS to RGB
parm:           hw_sections:0 use software section filter, 1 use hardware
parm:           adac:audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if 
autodetection fails)
parm:           pids_off:clear video/audio/PCR PID filters when demux is 
closed
parm:           vidmode:analog video out: 0 off, 1 CVBS+RGB (default), 2 
CVBS+YC, 3 YC
parm:           debug:debug level (bitmask, default 0)

* schnappel *

The module itself has dependencies. Therefore it knows what to do ;)

> Guy
--
Martin