[linux-dvb] Re: please help me with a diseqc switch problem

[belcampo <belcampo@zonnet.nl>]

DVR has a channels.conf which has data from both Astra's. When you start 
watching DVR it ads other channels it gets from the same transponder

Henk Schoneveld
On Monday 07 February 2005 19:01, Simon Kenyon wrote:
> On Monday 07 February 2005 15:48, belcampo wrote:
> > Hi Simon,
> >
> > I do have the same problem. I was able to scan by setting the 'default'
> > to diseqc 2. But after that I'm unable to watch livetv and use channels
> > which are from diseqc 1. So diseqc switching is broken in my opinion. For
> > me it has never worked in Myth. DVR although works fine, so my equipment
> > is OK.
> >
> > Henk Schoneveld
> >
> > On Monday 07 February 2005 15:36, Simon Kenyon wrote:
> > > i have a nexus-s (hauppauge) and i have tried with two switches (a 2
> > > way and a 4 way). i cannot get it to switch LNBs. this was initially
> > > with mythtv but i cannot get this to work with szap or scan either. if
> > > i disconnect an LNB from the switch, the other one works (this works
> > > both ways). with the LNBs directly connected to the nesus, they also
> > > both work.
> > >
> > > i've tried with the driver in 2.6.10 and also with CVS. same
> > > difference. what should i do to narrow down the problem? help would be
> > > appreciated.
> > >
> > > regards
> > > --
> > > simon
> > > ps this is gentoo, athlon 1G, 1 nexus, 1 pvr350 and a median frame
> > > grabber card. dvb-apps from cvs. two LNBs are pointed at the two astras
> > > (19.2 and 28.2)
>
> i have not got that far
> i cannot get scan or szap to switch LNBs
> --
> simon
> ps i suspect that if scan won't work then dvr has little chance of success